相关期刊:《Journal of Iron and Steel Research International》《Journal of Materials Science & Technology》《Baosteel Technical Research》《Defence Technology(防务技术)》更多>>
supported by the LingChuang Research Project of China National Nuclear Corporation,China Institute of Atomic Energy(E141L803J1);the Natural Science Foundation of Heilongjiang Province(No.TD2021E006).
9Cr ferritic/martensitic(9Cr F/M)steels are considered ideal structural materials for various nuclear energy systems.However,δ-ferrite(δ),as a controlled phase,may occur in its welds.Three deposited metals with diff...
supported by the National Key Research and Development Program of China(2018YFA0702902);the Innovation Project of Shenyang National Laboratory for Materials Science(SYNL-2022);the China Institute of Atomic Energy(E141L803J1).
The high Si-bearing 15Cr-9Ni-Nb metastable austenitic stainless steel weld metal was prepared via gas tungsten arc welding and then processed by stabilized heat treatment(SHT)at 850℃ for 3 h.The effects of 550℃ agin...
financial support from National Natural Science Foundation of China(Grant Nos.51831002,51904028 and 52233018),China;Fundamental Research Funds for the Central Universities(Grant No.06500151),China.
By both the Charpy V-notched impact and the projectile tests, we here investigated the dynamic fracture behavior of a recently developed ultrastrong lightweight steel comprising a hierarchical martensitic matrix, disp...
supported by the National Natural Science Foundation of China(No.52071018).
In the harsh service environment of high temperature and intense neutron irradiation in water-cooled nuclear reactors,the austenitic stainless steel weld overlay cladding on the inner surface of the reactor pressure v...
The cause of the premature failure of 304 stainless steel tube heat exchanger was investigated.The unique skeleton structure inside the leakage point reveals that this is a new damage mechanism caused by a δ+γ two-p...
financially supported by the National Natural Science Foundation of China (No. 51871218);the Youth Innovation Promotion Association, CAS (No. 2018227);the Ling Chuang Research Project of China National Nuclear Corporation;CNNC Science Fund for Talented Young Scholars
FF sample(nearly free ofδ-ferrite)and CF sample(containing∼4%δ-ferrite)were prepared from the AISI 316 austenitic stainless steel plate to elucidate the role ofδ-ferrite in the fatigue crack growth under the solut...
financially supported by the Opening Foundation of CAS Key Laboratory of Nuclear Material and Safety Assessment under Grant No.2019NMSAKF04;the China Institute of Atomic Energy under Grant No.2016-DGB-I-KYSC-0024。
Two types of 316 butt welds with carbon contents of 0.016%and 0.062%have been produced using the gas tungsten arc welding process.Theδ-ferrite content decreased from 7.2 to 2.8%in volume as the carbon content increas...
financially supported by the Opening Foundation of Key Laboratory of Nuclear Materials and Safety Assessment, Institute of Metal Research, Chinese Academy of Sciences (No. 2019NMSAKF04);China Institute of Atomic Energy (No. 2016DGB-I-KYSC-0024)。
The microstructure evolution and mechanical properties of the 316 H stainless steel weld metals with different C contents were studied at the aging temperature of 550℃ for different aging holding time.The transformat...
The cooling rate of casting has a significant effect on microstructure and mechanical properties of castings.The 9Cr-1.5Mo-1Co cast steel,referred to as CB2,is one of the most promising alloys for various cast compone...
In order to clarify the recrystallization mechanism of low-densityδ-ferrite steel Fe-4AI-2Ni,interrupted and single-pass compression tests were carried out.In this regard,five deformation temperatures(750-950 at an i...