financially supported by the National Natural Science Foundation of China(Nos.52293395 and 52293393);the Xiongan Science and Technology Innovation Talent Project of MOST,China(No.2022XACX0500)。
Understandings of the effect of hot deformation parameters close to the practical production line on grain refinement are crucial for enhancing both the strength and toughness of future rail steels.In this work,the au...
support from National Key Research and Development Program of China(No.2019YFA0209900);National Natural Science Foundation of China(No.52130102);Research Grants Council of Hong Kong(No.R7066–18);Guangzhou Municipal Science and Technology Project(No.202007020007);Guangdong Basic and Applied Basic Research Foundation of China(No.2020B1515130007);support from National Natural Science Foundation of China(No.52130110);support from National Natural Science Foundation of China(No.52271116);Hong Kong Scholars Program(No.XJ2019029).
Bainite transformation has yet to be utilized and even thoroughly studied in medium Mn steels.Here,we investigate the isothermal bainite transformation in a 10Mn steel at 450°C experimentally and theoretically,focusi...
Financial support from the Scientific and Technological Innovation Team for the Safety of Petroleum Tubular Goods at the Southwest Petroleum University(Grant No.2018CXTD01);“The Young Scholars”Development Fund of the Southwest Petroleum University of China is appreciated.
Hydrogen embrittlement of pipelines depends on the hydrogen-induced cracking behavior of the pipeline steel microstructure.Based on molecular dynamics analysis,the ferrite–cementite(α-Fe/Fe3C)lamellar atomic structu...
The work was supported by the National Key Research and Development Project(2017YFB0304500).
The impact wear behavior and damage mechanism of dissimilar welded joints between U26Mn frog and U75 V rail before and after normalizing treatment were studied by cyclic impact tests.The experiment indicated that the ...
supported by the National Natural Science Foundation(Grant No.52031013).
The influences of hot deformation parameters on pearlite grain nucleation and growth during austenite-pearlite phase transformation in a steel wire rod have been investigated through quantitative analysis of microstru...
The influence of carbon concentration variations on pearlite formation(20 h at 600℃)in a case-carburized steel is investigated.The resultant microstructure shows three distinct regions:carburized case,a transition re...
supported by Mitacs,InnoTech Alberta and Natural Science and Engineering Research Council(NSERC),Canada;Study of hydrogen atom distribution at metallurgical microphases of X52 steel by scanning Kelvin probe force microscopy and finite element modelling.
The work combined scanning Kelvin probe force microscopy measurements and finite element modelling to study the diffusion and distribution of hydrogen(H)atoms at metallurgical microphases contained in X52 pipeline ste...
This work was financially supported by the Major Science and Technology Program of Heilongjiang Province(Grant No.2019ZX10A02).
The microstructure and mechanical properties of pearlite in 45Cr4NiMoV and 50Cr5NiMoV steels were studied and compared.The microstructural characteristics of pearlite of two steels were carefully examined by optical m...
Funded by the National Key R&D Program of China(No.2017YFB0304801)。
The characteristic of near-surface microstructure and its effects on the torsion performance of cold-drawn pearlitic steel wires for bridge cables were investigated by focused ion beam-scanning electron microscope,tra...
support from the National Natural Science Foundation of China(5190102i);the"Beijing Institute of Technology Research Fund Program for Young Scholars".
Instead of conventional quenching and tempering,fast austenitization from an initial microstructure of lamellar pearlite followed by quenching and tempering was carried out,leading to the formation of inhomogeneous mi...