Funded by the Zhaoqing Xijiang Innovation and Entrepreneurship Team Project Funding of China(No.2017A0109004)。
We employed a melt ultrasonic treatment near the liquidus to prepare a high-thermal-conductivity Al-4Si-2Ni-0.8Fe-0.4Mg alloy.The influences of various ultrasonic powers on its microstructure,mechanical properties,and...
supported by the National Key R&D Program of China(Grant No.2021YFB3501404);the fund of the State Key Laboratory of Solidification Processing in NWPU(Grant No.SKLSP202101).
The obvious grain refinement of the primary MnSb phase has been observed in the Mn-89.7 wt%Sb alloy directionally solidified under a high-gradient magnetic field.With the application of a high-gradient magnetic field,...
supported by National Key Research and Development Program of China(2017YFA0403804);National Natural Science Foundation of China(51825401)
Ultrasonic treatment has great contributions on modifying the morphology,dimension and distribution of constituent phases during solidification,which serve as dominate factors influencing the hydrogen storage performa...
Project supported by the Guangdong Basic and Applied Basic Research Foundation (2019A1515110135,2021A1515010587);the Young Innovative Talents Projects of Universities in Guangdong Province(2020KQNCX084);the Guangdong Start-up Funds of DGUT (GC300502-52)。
Over the past decade,the cast aluminum alloys with excellent mechanical and conductivity properties have emerged as potential materials for thermal management.However,the traditional Al-Si based alloys are difficult t...
The effect of solutes on grain formation has been studied over a century but is still under debating,simply because it is a very complex topic.This article focuses on the effect of dissolved solute on the growth,fragm...
financially supported by the National Key R&D Program of China (No.2018YFC0310400);the Research Fund of the State Key Laboratory of Solidification Processing,China (Nos.2020-TS-06 and 2021-TS-02)
CoCrFeNiNb_(0.25)hypoeutectic high-entropy alloy(HEA)has shown good mechanical properties.However,due to interdendritic eutectics,it is challenging to further optimize the microstructure through cold rolling and annea...
supported by the Fundamental Research Program of Korea Institute of Materials Science(PNK7760 and PNK7770);the National Research Foundation of Korea(2020R1A2C2008416 and 2021M3H4A6A01049712)。
In this study the partially divorced eutectic microstructure ofα-Mg andβ-Mg17Al12was investigated by electron backscatter diffraction,transmission electron microscopy,and phase-field modeling in hypoeutectic Mg-Al a...
the Fundamental Research Funds for the Central Universities(Grant number FRF-TP-19-083A1);the Guangxi Special Funding Programme for Innovation-Driven Development(Grant number GKAA17202008)。
The effect of La addition(0,0.1,0.2,0.4,wt.%)on the microstructure,tensile properties and fracture behavior of Al-7Si alloy was investigated systematically.It is found that the La appears in the Al-7Si alloy in the fo...
FAPERJ(Fundacao de Amparo a Pesquisa do Estado do Rio de Janeiro,APQ#1:E-26/010.001942/2019);CNPq(Conselho Nacional de Desenvolvimento Cientifico e Tecnologico)for their financial support。
The objective of the work is focused on predictions of microsegregation,solidification speed,dendritic arm spacings and dendrite morphology by phase-field model.The numerical results were compared with experimental da...
the National Science Centre(Poland),grant UMO-2016/23/B/ST8/00724.
The study is concerned with the mechanical properties of Zn and three Zn–Mg double alloys with Mg concentrations:0.5%,1.0%and 1.5%in the form of rods with a diameter of 5 mm as potential materials for use in biodegra...