We would like to acknowledge the support of National Key R&D Program of China(No.2017YFB0305202);Inner Mongolia Natural Science Foundation(No.2016MS0510);Inner Mongolia Natural Science Foundation(No.2020MS05046).
Based on the thermal simulation method,a systematical analysis was conducted on the effect of welding peak temperature and the cooling time that takes place from 800 to 500℃ on microstructure,precipitates,substructur...
the National Natural Science Foundation of China(No.51974184);National MCF Energy R&D Program of China(No.2018YFE0306102);Independent Research Project of State Key Laboratory of Advanced Special Steel and Shanghai Key Laboratory of Advanced Ferrometallurgy,Shanghai University.
Precipitation strengthening of nano-scale TiC is a promising method to improve mechanical properties of Fe–16Mn–9Al–0.8C (wt.%) low-density steel. This work attempted to introduce nano-scale TiC precipitates by add...
Supported by Startup Fund for Youngman Research at SJTU(SFYR at SJTU);National Basic Research Program of China(Grant No.2011CB012904);China Postdoctoral Science Foundation(Grant No.2013M541517)
High-dispersed nanoscale Cu precipitates often contribute to extremely high strength due to precipitation hardening,and whereas usually lead to degraded toughness for especially ferritic steels.Hence,it is important t...
financially supported by Wuhan Iron&Steel Co.,Ltd.
The influence of Nb content on the microstructure and cryogenic mechanical properties of a 7%Ni steel was investigated within the Nb content range from 0 to 0.05%. The microstructure was characterized by optical micro...
X-ray diffraction was utilized to measure the residual stress of 45 mm UNS N08810 plates after post-weld heat treatment at temperatures of 680℃ and 900℃, which showed reductions of 86.9% and 71.6% in the residual st...
At Baoshan Iron & Steel Co., Ltd., comer cracks of boron containing LCAK steel slabs had caused remarkable quality loss and mass flow disorder. With the help of fractography and thermodynamics analysis, the embrittle...
Studies were made of the effect of tempering at temperatures from 25 to 750℃ for 0.5 to 100 h on changes of hardness,precipitated phase and its alloying element content as well as activation energy of tempering for q...