support from the National Natural Science Foundation of China (No. U1960202);the Opening Foundation from Shanghai Engineering Research Center of Hot Manufacturing, China (No. 18DZ2253400)。
This work focuses on the influence of Al content on the precipitation of nanoprecipitates,growth of prior austenite grains(PAGs),and impact toughness in simulated coarse-grained heat-affected zones (CGHAZs) of two exp...
supported by the National Key Research and Development Program of China (No. 2023YFB3812601);the National Natural Science Founda tion of China (Nos. 51925401, 92066205, and 92266301)。
Simultaneously achieving high strength and high electrical conductivity in Cu–Ni–Si alloys pose a significant challenge, which greatly constrains its applications in the electronics industry. This paper offers a new...
supported by the National Natural Science Foundation of China(No.52201226);Fundamental Research Program of Shanxi Province,China(No.202103021223036);the Key Scientific Research Project in Shanxi Province,China(No.202102050201007);the special fund for Science and Technology Innovation Teams of Shanxi Province,China(No.202204051001004)。
The effect of adding Cr and Mg on the microstructure and properties of Cu−Ti alloys was examined.Cu−Ti−Cr−Mg alloys were fabricated using vacuum induction melting.The microstructure and phase composition of Cu−Ti−Cr−M...
the financial support from the National Natural Science Foundation of China (No. 52274369);the Science and Technology Program of Hunan Province, China (No. 2020GK2044)。
The microstructure and mechanical properties of the WAAM-ZL205A alloy were investigated at various thermal exposure temperatures and compared with those of the deposited and T6-treated alloys.Due to the precipitation ...
supported by the National Natural Science Foundation of China[grant nos.52371005,52022017,and 51927801];Fundamental Research Funds for the Central Universities.E.G.thanks Xiaomi Foundation for support.
The development of low-cost,high-performance Mg alloys is crucial to the industrial applications of large-scale production of Mg alloys.In this work,extruded Mg-5Bi-3Al alloy with excellent mechanical properties is su...
supported by the Ministry of Industry and Information Technology of China(grant number TC220A04W-7,203);CNNC Youth Elite Scientific Research Project,the National Key R&D Plan of China(grant number 2020YFB1901600);the National Science Technology Major Project of China(grant numbers 2017ZX06902012 and 2017ZX06901024).
Nickel-based alloys are the primary structural materials in steam generators of high-temperature gas reactors.To understand the irradiation effect of nickel-based alloys,it is necessary to examine dislocation movement...
supported by Guizhou Provincial Key Technology R&D Program(No.[2022]052).
Uniaxial tensile testing explored the Portevin-Le Chatelier(PLC)effect in nickel-based superalloys featuring high Mo/Cr mass ratios,focusing on the influence of variations in the initial microstructure on the deformat...
Project supported by the National Natural Science Foundation of China(52071093,52071175);the Natural Science Foundation of Heilongjiang Province of China(LH2023E059);the Opening Project of Jiangsu Key Laboratory of Advanced Structural Materials and Application Technology(ASMA202205)。
Microstructure regulation via short-time heat treatment is conducive to the optimization in the microstructure and properties of precipitable magnesium(Mg)alloys,but there is currently a lack of relevant studies.In th...
financially supported by the National Natural Science Foundation of China(52474401);Project funded by China Postdoctoral Science Foundation(No.2022M712919);Project National United Engineering Laboratory for Advanced Bearing Tribology(No.202207);Guangdong Basic and Applied Basic Research Foundation(2023A1515140124)
The increasingly desirable mechanical and physical properties limits the application of traditional Cu-Cr alloys,and deserves the compositional design and processing optimization of Cu-Cr-Ti alloys.The effects of cold...
Project supported by the National Natural Science Foundation of China(52271066);Basic Research and Innovation Project for Vehicle Power;Key Project of“Two-Chain Integration”in Shaanxi Province(2023-LL-QY-33-3);Xi'an Key Laboratory of Corrosion Protection and Functional Coating Technology for Military and Civil Light Alloy;Key Project of Shaanxi Natural Science Foundation Research Program(2021JZ-54)。
Through independently developed stress-loading equipment,stress corrosion tests on Mg-Gd-Y alloy were conducted in a 3.5 wt%NaCl solution.The effects of plastic compressive stress on the corrosion behavior of the allo...