supported by financial support from the National Natural Science Foundation of China(Nos.52275323 and 52125502).
Diffusion bonding of titanium and its alloys typically requires high temperatures,which may lead to structural deformation,grain coarsening,and deterioration in the properties of the workpiece.In this study,we achieve...
the financial support from Shanghai Pujiang Program(Grant No.20PJ1403700);Basic Scientific Research Program(JCKYS2020213002);National Key Research and Development Program of China(2017YFB0702901);Key Program of Science and Technology of Yunnan Province(Grant No.202002AB080001-2).
The isothermal oxidation behavior of 56Nb-16Si-(20-x)Ti–3Cr–3Al-2Hf-xZr(x?0,2,5,10 at.%)alloys was investigated at 800℃ and 1250℃,respectively.The results show that increasing the Zr content evidently increased th...
The study was partially supported by the National Natural Science Foundation of China(NSFC)(grant number 81771126).
Binary titanium–niobium(Ti–Nb)alloys have recently been attracted due to low Young’s moduli and non-toxic properties.This study explores the influence of low Nb content(0–25 wt%)on the comprehensive parameters of ...
Funded by the Major Projects of Technology Innovation of Hubei Province(No.2017AAA116);the National Natural Science Foundation of China(NSFC)(Nos.51274154,51704217);Hebei Joint Research Fund for Iron and Steel(No.E2018318013)
Four Nb-Ti microalloyed steels were refined and rolled to study the composition optimization of Nb-Ti microalloyed steels. The effects of Nb and Ti on the microstructures, precipitates and properties of Nb-Ti microall...
financially supported by the National Natural Science Foundation of China(No.51101050);theFundamental Research Funds for the Central Universities(Nos.2013B18114 and 2015B22614);the Natural Science Foundation of Jiangsu Province of China(No.BK20141156)
The most effective carbide-forming elements titanium and niobium were added into hardfacing alloy.Formation and composition of carbides in the hardfacing alloy were investigated by means of optical microscope(OM),sc...
Item Sponsored by National Natural Science Foundation of China(51374151);Foundation for Key Program of Shanxi Province of China(20111101053);Foundation for Major Coal Base New Materials Program of Shanxi Province of China(MC2014-02)
The strengthening mechanisms of hot-rolled steels micro alloyed with Ti (ST-TQS00) and Nh Ti (NT TQ500) were investigated by examining the microstructures of steels using optical microscope (OM), scanning elec t...
financially supported by the National Basic Research Program of China (No.2011CB605506)
The purpose of this paper is to estimate the fatigue crack growth threshold of a high-Nb TiAl alloy at the different temperatures based on scanning electron microscopy (SEM) in-situ observation. The results indicate...
Niobium doped titanium oxide (TiO2) colloid was synthesized to fabricate a hydrogen gas sensor layer on oxidized silicon wafer substrate. The layers were obtained using spin coating technique and then heated in air at...
The effect of Ti and Nb on the recrystallization and the recrystallized grain size of the hot-rolled plates and cold-rolled sheets of ultra low carbon and nitrogen (ULCN) Cr18 ferritic stainless steel (FSS) is inv...