相关期刊:《IEEE/CAA Journal of Automatica Sinica》《Journal of Iron and Steel Research International》《Journal of Materials Science & Technology》《Science China(Technological Sciences)》更多>>
A coupled cellular automaton-finite element model was developed to simulate the solidification behavior and structure of 38CrMoAl large round bloom,in which mold electromagnetic stirring+final electromagnetic stirring...
supported by Shanghai Post-doctoral Excellence Program of China(No.2021166);Shanghai Rising-Star Program(Nos.20QA1403800 and 21QC1401500);Shanghai Science and Technology Committee(No.21511103600).
It has been demonstrated that heat absorption method by using the inorganic material rod to cool the molten steel can significantly reduce the macrosegregation level of the large steel ingot.However,owing to the opaci...
financially supported by National key research and development program of China(No.2017YFB0602101,2018YFB0604404)。
700°C double reheat advanced ultra-supercritical power generation technology is one of the most important development directions for the efficient and clean utilization of coal.To solve the great exergy loss problem ...
supported by the National Natural Science Foundation of China(Grant No.52074030).
The world’s first three-graphite electrode direct current(DC)plasma heating system(2500 kW)was successfully put into production on the 50-t tundish of a two-strand slab caster.The single metallic torch plasma tundish...
supported by the National MCF Energy R&D Program(Grant No.2018YFE0312300);the National Natural Science Foundation of China(Grant No.51706102).
Visualization experiments are carried out to investigate the atomization characteristics of R1336mzz flash spray cooling.The influences of superheat,spray distance,and nozzle orifice diameter on spray cooling performa...
National Key Research and Development Program of China(No.2017YFB0701802);NSFC(Nos.51504148 and U1760204).
The influences of superheat and cooling intensity on macrostructure and macrosegregation of one new kind duplex stainless steel(DSS)were studied.Thermal simulation equipment was applied to prepare samples,which could ...
supported by the National Natural Science Foundation of China(61773405;61751312);the Major Scientific and Technological Innovation Projects of Shandong Province(2019JZZY020123)。
Extreme learning machine(ELM)has been proved to be an effective pattern classification and regression learning mechanism by researchers.However,its good performance is based on a large number of hidden layer nodes.Wit...
the Shandong Electric Power Engineering Consulting Institute science and technology project(Grant No.37-K2014-33).
Improving the primary steam parameters is one of the most direct ways to improve the cycle efficiency of a powergeneration system. In the present study, the typical problem connected to the excessively high superheat ...
the National Natural Science Foundation of China(No.51376119)
Compared with port fuel injection engines, direct injection(DI) gasoline engine is becoming the mainstream of gasoline engines because of its higher fuel economy and excellent transient response. It has been proven th...
supported by the National Natural Science Foundation of China(61233004,61221003,61374109,61473184,61703223,61703238);the National Basic Research Program of China(973 Program)(2013CB035500);Shandong Provincial Natural Science Foundation of China(ZR2017BF014,ZR2017MF017);the National Research Foundation of Singapore(NRF-2011,NRF-CRP001-090)
Abstract--Vapor compression refrigeration cycle (VCC) system is a high dimensional coupling thermodynamic system for which the controller design is a great challenge. In this paper, a model predictive control based ...