云南高校图书馆联盟文献共享服务平台- 火花等离子体烧结

火花等离子体烧结: 作品数：10被引量：9H指数：2; 导出分析报告; 相关领域：一般工业技术金属学及工艺更多>>; 相关作者：谢雄更多>>; 相关机构：哈利伯顿能源服务公司株式会社东芝重庆大学原子能委员会更多>>; 相关期刊：《Science Bulletin》《现代材料动态》更多>>; 相关基金：国家自然科学基金中国博士后科学基金国家教育部博士点基金更多>>

用火花等离子体烧结技术制成的钛复合材料: 《现代材料动态》2009年第5期12-12,共1页杨英惠（摘译）; 意大利特连托大学用火花等离子体烧结技术制成了钛复合材料，研究了颗粒强化对粉末冶金Ti6A14V合金的微结构及力学特性的影响。采用了两种颗粒增强剂——-TiBe2和SiC，将其与合金粉末混合后，进行烧结。火花等离子体烧结要求温度不高，...; 关键词：火花等离子体烧结烧结技术复合材料 TI6A14V合金钛颗粒强化力学特性粉末冶金

用火花等离子体烧结技术制成的钛复合材料: 《现代材料动态》2009年第4期11-11,共1页; 意大利特兰托大学用火花等离子体烧结技术制成了钛复合材料，研究了颗粒强化对粉末冶金Ti6A14V合金的微结构及力学特性的影响。采用了两种颗粒增强剂——TiB2和SiC，将其与合金粉末混合后，进行烧结。火花等离子体烧结要求温度不高，而...; 关键词：火花等离子体烧结烧结技术复合材料 TI6A14V合金钛颗粒强化力学特性粉末冶金

Mechanical alloying and characteristics of spark plasma sintering of Ti-Al composite powders: 《中国有色金属学会会刊：英文版》2007年第A02期608-613,共6页陈华薛涛门洪志; Project (20050513) supported by the Science and Technology Development Program of Jilin Province, China; The mechanical alloying process of Ti-Al composite powders were carried out by use of high energy ball-milling machine. Structure variations of powder mixtures during mechanical alloying and characteristic of spark pl...; 关键词：机械合金化钛铝金属间化合物火花等离子体烧结微观结构

Microstructure and properties of p-type (Bi_(0.25)Sb_(0.75))_2Te_3 fabricated by spark plasma sintering: 《中国有色金属学会会刊：英文版》2007年第A02期1010-1013,共4页王富强陈晖王忠成艳褚颖朱磊简旭宇; P-type thermoelectric material(Bi0.25Sb0.75)2Te3 was sintered by spark plasma sintering(SPS) process in the temperature range of 320-420 ℃. The microstructures of sintered materials were found to be well aligned,part...; 关键词：热电材料火花等离子体烧结烧结温度微观结构性能

Preparation and mechanism study of bulk pure rare-earth metals with amorphous and nanocrystalline structures被引量：1: 《Chinese Science Bulletin》2007年第3期418-422,共5页LI ErDong SONG XiaoYan ZHANG JiuXing LU NianDuan; the National Natural Science Foundation of China (Grant No. 50401001);the Research Fund for the Doctoral Program of Higher Education (Grant No. 20050005011);the Key Project of Science & Technology Innovation Engi-neering, the Chinese Ministry of Education (Grant No. 705004); The preparation and the mechanism study of bulk pure rare-earth metals with amorphous and nanocrystalline structures, which were produced by spark plasma sintering (SPS), were carried out in this paper. With different...; 关键词：块状稀土金属非晶态结构纳米晶结构火花等离子体烧结制备机制纳米材料

Influence of powder characteristics on structure and properties of Ni3Al fabricated by spark plasma sintering: 《中国有色金属学会会刊：英文版》2006年第A02期112-116,共5页孟杰贾成厂何箐; 关键词：粉末性质火花等离子体烧结 NI3AL 机械合金化结构性能

SiC whisker reinforced MoSi_2 composite prepared by spark plasma sintering from COSHS-ed powder被引量：2: 《中国有色金属学会会刊：英文版》2006年第B02期504-507,共4页许剑光张厚安江国健张宝林李文兰; Project (50232020) supported by the National Natural Science Foundation of China; SiC whisker reinforced MoSi2 composite powder was synthesized by a novel process, referred to the literature as chemical oven self-propagating high temperature synthesis(COSHS). The as-prepared SiCw/MoSi2 composite po...; 关键词：碳化硅晶须 MOSI2 纤维增强复合材料火花等离子体烧结 COSHS技术粉末制备

A bulk metal/ceramic composite material with a cellular structure被引量：5: 《Chinese Science Bulletin》2006年第2期235-239,共5页ZHAO Zhankui YAO Kefu LI Jingfeng; This work was supported by the China Postdoctoral Science Foundation(No.2003033133);the Basic Science Research Foundation of Tsinghua University(Grant No.091201107);the National Center for Nanoscience and Technology of China.; A bulk metal/ceramic composite material with a honeycomb-like micro-cell structure has been prepared by sintering the spherical Al90Mn9Ce1 alloy powders clad by Al2O3 nano-powder with the spark plasma sintering (SPS) ...; 关键词：金属/陶瓷复合材料多孔结构制备方法火花等离子体烧结

Fabrication and mechanical properties of WC-Co-Al_2O_3 nanocomposites by spark plasma sintering: 《中国有色金属学会会刊：英文版》2005年第2期233-237,共5页沈军张法明孙剑飞; Project(50374035) supported by the National Natural Science Foundation of China; Key Project(230103640324323) sup ported by Nano Science and Technology Fund of Heilongjiang Province; China; Small amounts of nanocrystalline Al2O3 particles were doped in WC-Co nanocrystalline powders to study their reinforcing effects, and spark plasma sintering technique was used to fabricate the WC-Co-Al2O3 nanocomposite...; 关键词：纳米金属陶瓷材料机械性质钨碳-钴-氧化铝火花等离子体烧结

Synthesis of Ti_3SiC_2 by spark plasma sintering(SPS) of elemental powders被引量：1: 《中国有色金属学会会刊：英文版》2003年第1期46-49,共4页朱教群梅炳初何利萍陈艳林; Project( 5 0 172 0 37)supportedbytheNationalNaturalScienceFoundationofChina; Ti 3SiC 2 materials have been fabricated by spark plasma sintering of the elemental powders with the addition of Al. At the heating rate of 80 ℃/min and under the pressure of 30 MPa, the ideal synthesis temperature o...; 关键词：TI3SIC2 合成技术火花等离子体烧结粉末钛硅碳三元化合物

火花等离子体烧结