Funded by Joint Funds of the National Natural Science Foundation of China(No.U1904188);the Jiangxi Provincial Department of Education Science and Technology Project(Nos.GJJ171079,GJJ181023,and GJJ181022)。
To solve the problem of only surface carbonation and realize high-efficiency carbonation of recycled coarse aggregate,the method of carbonated recycled coarse aggregate with nano materials pre-soaking was first put fo...
Funded by the Program for Changjiang Scholars and Innovative Research Team in University(PCSIRT)(No.IRT1146);the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)
C3S pastes containing 0%,5%,10%,and 15%nano-SiO2 mixed with de-ionized water and alkali solutions were prepared.When C3S was completely hydrated,the pastes were ground into powders with a particle size less than 80μm...
Funded by the National Key Research Program(973 Program)(No.2015CB655101);the National Natural Science Foundation of China(No.51379163)
Early hydration mechanism of cement-based materials with silica fume, nano-SiO2 and silica sol of different contents was investigated, and the detailed effect of these Si-rich mineral admixtures in three stages of ear...
Funded by the Fundamental Research Funds for the Central Universities(No.2013-YB-25);the National Natural Science Foundation of China(No.51378408)
The influences of different nano-SiO2(NS) contents on the mechanical properties and rheological behavior of sulfoaluminate cement(SAC) based composite materials were studied.Results show that with increasing conte...
Funded by the Shanxi Province Science Foundation for Youths of China[Nos.2014021020-2 and 2015021076];the Shanxi Province Higher School Science and Technology Innovation Project[No.2015125];the Project of Taiyuan University of Technology[Nos.2013T020;2013T021;2013T022]
In order to improve the thermal properties of polylactic acid(PLA) filament,nano-SiO_2 was applied to mix with PLA,then they were spun as composite filament by melt-spinning.The dispersion of nano SiO_2 and the frac...
Supported by National High Technology Research and Development ProgramofChina(863Program)(No.2003AA305920)
We put forward a large-area and cost-effective method to fabricate superhydrophobic coating by introducing in-situ functionalized nano-SiO2 into side-amino modified hydroxy-terminated polydimethylsiloxane (SA-HTPDMS...
Funded by the Special Fund of Basic Scientific Research of Rubber Research Institute of CATAS;Key Laboratory of Ministry of Agriculture for Natural Rubber Processing (No. xjszx-13 and No. xjsbywfzx2009-19, 706057)
Nano SiO2/NR composites were prepared through blending nano SiO2 emulsion with natural rubber latex and then concreting with acetic acid. The emulsion nano SiO2 was prepared with Na2SiO3-9H2O and hydrochloric acid und...
Funded by the Commission of Science Technology and Industry for National Defense(No.93013)
Nano-SiO2/polypropylene composite was prepared by melt-blending process. The nano-SiO2 particles were organized by wet process surface treatment with silane coupling agent KH-570. The effect of mass fraction of nano-S...
The test of fast-freezing method is employed to research the freezing resistance of C60 and C80 high-performance concrete with nanometer-SiO2, and XRD and SEM are employed to analyze the mechanism of its influence. Th...
Funded bythe Center of Science Research, Zhejiang Universityof Technology of China
The pozzolanic activity of nano-SiO2 and silica fume was comparatirely stndied by X-ray diffraction ( XRD ) , differential scanning calorimetry (DSC), scanning electron micrascopy (SEM) and the compressive , bon...