Fnded by the National Key Research and Development Program of China(No.2023YFC3807202);the Key Research and Development Plan in Hubei Province of China(Nos.2022BCA082 and 2024BAB108);the Annual Research Project of China Railway Construction Corporation(No.2023-B03)。
The effects of styrene-butadiene-styrene(SBS)pre-swelling/extraction process and the incorporation of C9 petroleum resin on the anti-aging performance of modified asphalt were systematically evaluated by characterizin...
Funded by the Research Funds of China University of Mining and Technology(No.102523215)。
The pre-wetting of aggregate surface is a means to improve the interface performance of SBS modified asphalt and aggregate.The effect of pre-wetting technology on the interaction between SBS modified asphalt and aggre...
National Key Research and Development Project of China(No.2017FB0310902)。
Dense pre-hydrated geosynthetic clay liners(DPH GCLs)were manufactured as innovative materials accompanied by the advantage of lower hydraulic conductivity(k).The k of DPH GCLs permeated with de-ionized water(DIW)was ...
Funded by the National Natural Science Foundation of China(No.51627805);the Natural Scienceof Guangdong Province,China(No.2015A030312003);the Science and Technology Research Project of Guangdong Province,China(No.2014B010129003)。
The effect of the inlet gas pressure,supplementary gas pressure and nozzle channel dispersion angle on the pre-breakup behavior of Ti-6Al-4V(TC4)discontinuous droplets during EIGA was investigated by combining numeric...
Funded by National Natural Science Foundation of China(Nos.U1965105,51878245,52008189);Fundamental Research Funds for the Central Universities(No.B200203197);National Key Research and Development Program of China(No.2017YFB0310100);Ningbo 2025 Science and Technology Major Project(No.2020Z035);the State Key Laboratory of High Performance Civil Engineering Materials(No.2019CEM001)。
The pre-soaked shale employed as an internal curing agent and CaO employed as expansion agent were incorporated into concrete to investigate their effects on the mechanical properties and autogenous deformation of ear...
Funded by the National Key Research and Development Program of China(Nos.2017YFC1103800,2016YFC1101605);Wuhan Key Science and Technology Project(No.2017060201010191)
An in-situ consolidation method was developed and optimized to successfully fabricate alumina ceramics using pre-gelling starch. Our results showed that the obtained ceramics have more homogeneous microstructure, high...
Funded by the National Natural Science Foundation of China(No.51571043);the International Science&Technology Cooperation Program of China(No.2014DFG52810);the Fundamental Research Funds for the Central Universities(No.106112015CDJZR135515)
The influence of pre-deformation and heat treatment on mechanicalproperties of as-extruded ZK60 alloy was investigated.The experimentalresults indicated that the solid solution,pre-cold rolling and artificialaging tre...
Founded by the Doctoral Program of Higher Education(No.20130143110013);the Key Technology Innovation Project of Hubei Province(No.2013AAA017);the Wuhan Key Project of Science and Technology(2013010501010134);the Hubei Key New Product Research and Development of New Technology Project(No.2013BAA042);the Natural Science Foundation of Hubei Province(No.20131j0204)
The physical properties, the pre-reacting performance and melting properties of the loose glass batch and the granulated glass batch were investigated, respectively. The experimental results showed that compacted glas...
Funded by the National Natural Science Foundation of China(51073098);the Open Project of State Key Laboratory of Polymer Materials Engineering(Sichuan University),China(KF200901)
PAN fibers pre-oxidized at 240℃, 260℃, 280℃, 300℃ were treated in 8 T, 12 T, 16 T high magnetic fields, respectively. The experimental result implied that there were two kinds of magnetic units cyan and carbon-nit...
Funded by National High-tech Research and Development Projects of China(No. 2002AA6Z3083)
An ultraviolet(UV) curable support material pre-polymer for three dimensional printing was prepared based on the synergistic effect between PEO-PPO-PEO tri-block copolymer(F127) and polyethylene glycol (400) di-...