Funded by the National Natural Science Foundation of China(No.51878227)。
Microstructures and properties of mortar using ammonium phosphate and potassium phosphate were tested and compared in this case.Moreover,two cementitious additions and two lightweight aggregates,including fly ash,redi...
Funded by the Xining Key R&D and Transformation Program(No.2024-Y-11);the Qinghai Province“Kunlun Talents-Highend Innovation and Entrepreneurship Talents”Top Talents。
A new type of magnesium oxychloride cement(MOC)was prepared based on calcined MgO powder from hydromagnesite in Tibet,China,with the addition of MgCl_2,a by-product of potassium extraction from the salt lake.The effec...
Funded by the National Natural Science Foundation of China(No.52008304);the Natural Science Foundation of Fujian Province(No.2023J05021);the Startup Foundation of Scientific Research by Fuzhou University(Nos.XRC-18016 and GXRC21060)。
To investigate the impact of limestone powder on the chloride ion concentration coefficient of cement pastes,various techniques such as scanning electron microscopy(SEM),X-ray diffraction(XRD),thermogravimetric analys...
Funded by Science and Technology Research Program of Chongqing Municipal Education Commission(No.KJZD-K202212905);Natural Science Foundation of Chongqing,China(No.cstc2019jcyj-msxmX0453)。
Fluorographene(FG)with narrow lateral size and thickness distributions was prepared by a liquid-phase exfoliation method,based on liquid cascade centrifugation.The Rtec MFT-5000 tribo-meter was used to investigate the...
Funded by the Scientific and Technological Innovation Project of Carbon Emission Peak and Carbon Neutrality of Jiangsu Province(No.BE2022028-4)。
Industrial wastes such as steel slag and coal gangue etc.were chosen as raw materials for preparing ceramic via the conventional solid-state reaction method.With steel slag and coal gangue mixed in various mass ratios...
Funded by the Doctoral Fund of Chengdu University(No.2081919131);the Sichuan Science and Technology Program(No.2023YFG0229)。
Ni^(2+)/Cu^(2+)/SO_(4)^(2-)/polyvinyl alcohol precursor fibers with uniform diameters were prepared through electrospinning.Nickel-based composite nanoalloys containing Ni,Cu,and S were prepared through heat treatment...
Nev?ehir Hac?Bekta?Veli Runiversity Scientific Research Projects Coordination Unit (No. NEüLüP16/2F3)。
Ag-In intermetallic alloys were produced by using vacuum arc furnace. Differential Scanning Calorimetry(DSC) and Energy Dispersive X-Ray Spectrometry(EDX) were used to determine the thermal properties and chemical com...
“Solid Waste Recycling”Key Project of National Key R&D Plan of China(No.2018YFC1901700);the Fundamental Research Funds for the Central Universities of China(Nos.JZ2021HGTB0094 and PA2021GDGP0059)。
Mo-5Ta targets were prepared by the spark plasma sintering(SPS)technology under the sintering temperatures of 1400-1600℃,the holding times of 0-20 min,and the axial pressure of 30 MPa.The microstructure,performance,a...
Funded by the National Natural Science Foundation of China (Z20180222);the Independent Research and Development project of State Key Laboratory of Green Building in Western China (LSZZ202021);the Natural Science Foundation of Shaanxi Provincial Department of Education (20JY041);the Qingyuan Science and Technology Plan Project (No.2020KJJH040)。
The structure and characteristics of high-performance lightweight aggregates produced by high-carbon gasification slag were investigated by X-ray diffraction,scanning electron microscopy,thermogravimetry/differential ...
Funded by Research Fund of Center for Materials Research and Analysis,Wuhan University of Technology (No.2018KFJJ11)。
The Li_(2)O-Al_(2)O_(3)-SiO_(2) (LAS) glass-ceramics with low lithium content were prepared from spodumene mineral by melting method.XRD,DSC,and FTIR were used to study the crystallization process and structure of the...