supported by the National Key Research and Development Program of China(Grant No.2021YFB3701000);the National Natural Science Foundation of China(Grant Nos.52101125,52471118,U2037601,and U21A2048);the Young Elite Scientists Sponsorship Program by China Association for Science and Technology(CAST)(Grant No.2022QNRC001).
Segregation is a serious defect in alloy ingots which severely deteriorates materials performance.The segregation defect in Mg-6Gd alloy is studied by coupling macro thermal-solutal-convection transport and micro dend...
financially supported by the National Natural Science Foundation of China(51774003/52074002/51974002);the Ministry of Industry and Information Technology(TC190A4DA-35)。
To further improve the metallurgical quality of electroslag remelting,remove the large inclusions in electroslag ingot and refine the solidification structure of electroslag ingot,an electroslag remelting furnace with...
financially supported by the National Natural Science Foundation of China(Grant No.51904146)。
The total content of Al and Ti in advanced Ni-based wrought superalloys is up to 7.5wt.%,which makes it easier to form harmful nonequilibrium eutectic(γ+γ′)andηphase.It has been reported that the addition of certa...
the financial support from the National Natural Science Foundation of China(Nos.51425402 and 51501048)。
A transient three-dimensional powder-scale model was established for understanding the flow field and mass transfer within the molten pool during the selective laser melting(SLM)of Inconel 718 alloy by considering som...
financially supported by the National Natural Science Foundation of China(Grant No.51875365)。
Segregation can seriously damage the mechanical properties of the aluminum alloys.6061 aluminum alloy wheel spokes were prepared by squeeze casting.To investigate the formation mechanism of segregation,the microstruct...
financially supported by the National Natural Science Foundation of China-China Aerospace Science and Technology Corporation Aerospace Advanced Manufacturing Technology Research Foundation(NO.U1537202);the Special Funding Program on Transformation of Scientific and Technological Achievements at Jiangsu Province(No.BA2015041)
Microstructural and hardness evolutions of a vacuum-assistant die-cast A380(Al-8.67 wt.%Si-3.27 wt.%Cu) alloy during heat treatment were investigated. Isothermal DSC test at 200 °C revealed that the precipitation rea...
supported by the National Natural Science Foundation of China(Grant no.51404166);Shanxi Province Science Foundation for Youths(2013021013-4);Research Project Supported by Shanxi Scholarship Council of China(2014-023);Technological Innovation Programs of Higher Education Institutions Shanxi(Grant no.2014120);the Advanced Programs of Department of Human Resources and Social Security of Shanxi Province for Returned Scholars(2013101)
In this study, the influence of minor titanium(Ti) addition on the microstructure and tensile properties of Mg-8Sn-1Zn based alloys were investigated by means of optical microscopy, X-ray diffraction, scanning electro...
the Sahand University of Technology for providing the research facilities and financial support
The equilibrium partition ratio, k, has been measured for Mn, Mo, Si, Ni and Cu in a ductile iron with composition(wt.%): 3.45 C, 0.25 Mn, 0.25 Mo, 2.45 Si, 0.5Ni and 0.5Cu with different nodule counts obtained from d...
supported by the International Science & Technology Cooperation Program of China(No.2015DFR50470)
The influence of cooling rate and Fe-containing phases on Sr-modification of Si phases in hypoeutectic Al-Si alloys, a problem with great industrial importance, was investigated. The microstructures of samples were ex...
The formation of halfway cracks in continuous cast A36 steel slabs containing 17 ppm boron was studied by investigating the zero ductility temperature(ZDT), zero strength temperature(ZST), solidification characteristi...