云南高校图书馆联盟文献共享服务平台- AUSTENITIZATION

AUSTENITIZATION: 作品数：14被引量：33H指数：3; 导出分析报告; 相关领域：金属学及工艺一般工业技术更多>>; 相关期刊：《Journal of Iron and Steel Research International》《International Journal of Minerals,Metallurgy and Materials》《Journal of Materials Science & Technology》《Science China(Technological Sciences)》更多>>; 相关基金：国家自然科学基金国家重点基础研究发展计划国家高技术研究发展计划更多>>

Evolution of microstructures and mechanical properties with tempering temperature of a pearlitic quenched and tempered steel被引量：2: 《Journal of Iron and Steel Research International》2022年第9期1393-1403,共11页De-zhen Yang Zhi-ping Xiong Chao Zhang Guan-zheng Feng Zhifang Cheng Xing-wang Cheng; support from the National Natural Science Foundation of China(5190102i);the"Beijing Institute of Technology Research Fund Program for Young Scholars".; Instead of conventional quenching and tempering,fast austenitization from an initial microstructure of lamellar pearlite followed by quenching and tempering was carried out,leading to the formation of inhomogeneous mi...; 关键词：Fast austenitization PEARLITE TEMPERING MANGANESE Mechanical property

Effect of austenitization temperature on microstructure and mechanical properties of low-carbon-equivalent carbidic austempered ductile iron被引量：2: 《International Journal of Minerals,Metallurgy and Materials》2018年第7期770-778,共9页vinayak dakre d.r.peshwe s.u.pathak ajay likhite; The wear resistances of austempered ductile iron （ADI） were improved through intxoduction of a new phase （carbide） into the ma- txix by addition of chromium. In the present investigation, low-caxbon-equivalent duc...; 关键词：low carbon equivalent ductile iron （LCEDI） caxbidic austempered ductile iron （CADI） wear test austenitization temperature impact strength

Microstructural evolution of GCr15 steel during austenitizing and quenching considering C and Cr content被引量：1: 《Journal of Central South University》2016年第10期2492-2499,共8页刘青龙钱东升魏文婷; Project(51575414)supported by National Natural Science Foundation of China;Project(IRT13087)supported by the Innovative Research Team Development Program of Ministry of Education of China;Project(2015AAA005)supported by the project of Important Science and Technology Innovation Program of Hubei Province,China; Microstructural evolution of GCr15 steels with different C and Cr contents during austenitizing and quenching was studied. Thermodynamic analysis of cementite dissolution was implied to obtain the critical temperature...; 关键词：GCr15 steel AUSTENITIZATION QUENCHING thermodynamic calculation KINETICS

Microstructural evolution and mechanical properties of a low-carbon quenching and partitioning steel after partial and full austenitization被引量：3: 《International Journal of Minerals,Metallurgy and Materials》2016年第8期906-919,共14页Wan-song Li Hong-ye Gao Hideharu Nakashima Satoshi Hata Wen-huai Tian; funded by China Scholarship Council (No. 201406460053); In this work, low-carbon steel specimens were subjected to the quenching and partitioning process after being partially or fully austenitized to investigate their microstructural evolution and mechanical properties. A...; 关键词：low-carbon steel quenching partitioning microstructure mechanical properties interfaces

Effect of nodule count and austempering heat treatment on segregation behavior of alloying elements in ductile cast iron被引量：3: 《China Foundry》2016年第3期217-222,共6页E.Akbarzadeh Chiniforush N.Iranipour S.Yazdani; the Sahand University of Technology for providing the research facilities and financial support; The equilibrium partition ratio, k, has been measured for Mn, Mo, Si, Ni and Cu in a ductile iron with composition(wt.%): 3.45 C, 0.25 Mn, 0.25 Mo, 2.45 Si, 0.5Ni and 0.5Cu with different nodule counts obtained from d...; 关键词：SEGREGATION ductile iron AUSTENITIZATION AUSTEMPERING

Effects of Nitrogen Content and Austenitization Temperature on Precipitation in Niobium Micro-alloyed Steels被引量：1: 《Journal of Iron and Steel Research International》2015年第12期1164-1173,共10页Lei CAO Zhong-min YANG Ying CHEN Hui-min WANG Xiao-li ZHAO; Item Sponsored by the CITIC-CBMM Niobium Steel Research and Development Program of China(2013-D065); The influences of nitrogen content and austenitization temperature on Nb（C, N） precipitation in niobium micro-alloyed steels were studied by different methods： optical microscopy, tensile tests, scanning electron m...; 关键词：nitrogen content austenitization temperature l Nb（C N） preeipitation alloyed cementite

Effect of Martensite Fine Structure on Mechanical Properties of an 1100 MPa Grade Ultra-high Strength Steel被引量：7: 《Journal of Iron and Steel Research International》2015年第7期645-651,共7页Fan ZHEN Kuan ZHANG Zhi-long GUO Jin-bo QU; An 1100 MPa grade ultra-high strength steel with different martensite fine structures, characterized by prior austenite grain size, martensite packet size, block width and lath width, was studied by various heat treat...; 关键词：martensite fine structure ultra-high strength steel austenitization time packet size block width

Carbide Dissolution during Intercritical Austenitization in Bearing Steel: 《Journal of Wuhan University of Technology(Materials Science)》2014年第6期1242-1245,共4页李辉米振莉 ZHANG Xiaolei TANG Di WANG Yide; Funded by the National High-tech Research and Development Program of China(863 Program); In order to investigate the carbide dissolution mechanism of high carbon-chromium bearing steel during the intercritical austenitization, the database of TCFE7 of Thermo-calc and MOBFE of DICTRA software were used to ...; 关键词：intercritical austenitization carbide dissolution bearing steel diffusion mechanism

Enhancing ductility of the Al-Si coating on hot stamping steel by controlling the Fe-Al phase transformation during austenitization被引量：7: 《Science China(Technological Sciences)》2014年第9期1785-1793,共9页GUI ZhongXiang LIANG WeiKang ZHANG YiSheng; supported by the National Natural Science Foundation of China(Grant No.51275185);the National Basic Research Program of China("973"Program)(Grant No.2010CB630802-3); In this study, austenitizing heat treatment before hot stamping of Al-10% Si coated boron steel is first investigated through en- vironment scanning electron microscopy （ESEM） equipped with energy dispersive x-ray a...; 关键词：hot stamping Al-Si coating coating crack phase transformation DUCTILITY

Formation kinetics of austenite in pearlitic ductile iron被引量：1: 《International Journal of Minerals,Metallurgy and Materials》2012年第6期506-510,共5页Payam Abdollahi Alborz Amirsadeghi Shahram Kheirandish Shamsoddin Mirdamadi; This work evaluated the isothermal transformation of austenite in unalloyed pearlitic ductile iron and drew the isothermal phase diagram of austenitization in the ductile iron, Austenite forms at grain boundaries and ...; 关键词：cast iron ductility PEARLITE AUSTENITIZATION KINETICS isothermal transformations

AUSTENITIZATION