相关期刊:《Open Journal of Metal》《Journal of Materials Science & Technology》《Journal of Rare Earths》《Journal of Wuhan University of Technology(Materials Science)》更多>>
financially supported by the National Key Research and Development Program of China (No. 2016YFB0301003);the Shenzhen Free Exploring Basic Research Project (No. JCYJ20170307110223452)。
In this paper,two ways of micro structural characterization,optical microscopy(OM) and polarized light microscopy(PLM),were both employed to describe the micro structure of semisolid slurry prepared by swirling enthal...
Funded by the National Natural Science Foundation of China(No.51341009)。
A novel micro fused-casting(MFC)process is developed for semisolid aluminum alloy slurry.The microstructure evolution and properties of semisolid ZL101 aluminum alloy slurry with difierent pouring temperature by MFC a...
financially supported by the National Natural Science Foundation of China (Nos. 51174028 and 51541406)。
The aim of this paper is to characterize the evolution of fine and spheroidal microstructure of Al-Zn-Mg-Cu alloy by strain-induced melting activation(SIMA)and recrystallization and partial remelting(RAP) routes.The p...
supported by the International Science and Technology Innovation Cooperation Program of Sichuan Province,China (Grant No. 2019YFH0095);the National Natural Science Foundation of China (Grant No. 51201142);the Major Scientific and Technological special Project of Yunnan Provincial Science and Technology Department(202002AB080001-4)。
The combination of semisolid and hot extrusion processing was applied to refine the icosahedral quasicrystalline phase(I-phase) in an extruded Mg-1.92Zn-0.34Y(wt.%) alloy for the first time. The semisolid isothermal h...
supports from University of Tehran;Shahid Rajaee Teacher Training University
The effects of temperature and strain rate on the semisolid deformation behavior of a high Zr WE54 magnesium alloys were studied at temperatures of 570,595 and 620℃.A flow stress peak was appeared during deformation ...
financially supported by the National Natural Science Foundation of China (Nos.51364035 and 51165032)
The rheological behavior of semisolid Mg_(2)Si/AM60 composites prepared by ultrasonic vibration treatment was investigated.The effects of primaryα-Mg solid content,the ultrasonic power and the content of reinforcemen...
The effects of erbium addition on the rheological properties and microstructure of a semisolid A356 alloy were studied.The semisolid slurries were prepared through the serpentine channel technique before they were thi...
financially supported by the National Key Research and Development Program of China (Grant No. 2018YFB2001800)
Subjecting a normal mechanical vibration to a cooling slope plate,is a proposed method for preparing semisolid nondendritic slurry,named shear-vibration coupling sub-rapid solidification(SCS).Taking Al-8Si alloy as mo...
Project(SAP-9162)supported by the Ministry of Mines,Technology Information,Forecasting and Assessment Council(TIFAC),Department of Science and Technology(DST),India。
This study involves A356 alloy molded through ultrasonically vibrated cooling slope.The slope alongside ultrasonic power enables indispensable shear for engendering slurry from which the semisolid cast/heat treated bi...
supported by the National Key Research and Development Program(grant No.2018YFB2001800);the National Natural Science Foundation of China(grant No.51564035)。
Due to the similarity in composition and crystal structure of some Ti Al Si ternary intermetallics,it is quite difficult to accurately confirm their physic characteristics,and thus,to tailor microstructure to improve ...