云南高校图书馆联盟文献共享服务平台- A1

A1: 作品数：1645被引量：2926H指数：16; 导出分析报告; 相关领域：医药卫生农业科学更多>>; 相关作者：方颖阮长耿吴建华王军文刘广建更多>>; 相关机构：中国科学院苏州大学华南理工大学中南大学更多>>; 相关期刊：更多>>; 相关基金：国家自然科学基金国家高技术研究发展计划国家重点基础研究发展计划广东省自然科学基金更多>>

Microstructure and wear performance of Al5083/CeO_2/SiC mono and hybrid surface composites fabricated by friction stir processing: 《Transactions of Nonferrous Metals Society of China》2018年第5期866-878,共13页M.AMRA Khalil RANJBAR S.A.HOSSEINI; financial support provided by Shahid Chamran University of Ahvaz, Iran; Friction stir processing（FSP） was utilized to produce surface composites by incorporating nano-sized cerium oxide（CeO2） and silicon carbide（SiC） particles individually and in combined form into the Al5083 alloy ...; 关键词：A15083 alloy friction stir processing CEO2 SIC surface composites wear mechanism

Hot deformation behavior of high Ti 6061 Al alloy被引量：3: 《Transactions of Nonferrous Metals Society of China》2016年第2期369-377,共9页陈微官英平王振华; The hot deformation behavior of a high Ti 6061 aluminum alloy in the temperature range from 350 to 510 ℃ and strain rate range from 0.001 to 10 s^-1 was investigated using stress-strain curve analysis, processing map...; 关键词：6061 A1 alloy hot deformation dynamic recovery hot processing map DISLOCATION

Grain refining effect of Mg by novel particle cluster-containing Al-Ti-C master alloy被引量：2: 《Transactions of Nonferrous Metals Society of China》2015年第6期1804-1810,共7页刘晓滕郝海朱小旭张兴国; Project(DUT15JJ(G)01) supported by the Fundamental Research Funds for the Central Universities,China;Project(2009AA03Z525) supported by the National High-tech Research and Development Program of China; A novel A1-Ti-C master alloy containing A14C3 and TiC particle clusters, which exhibits great refining potential for Mg, was prepared. With the addition of 2% A1-Ti-C master alloy, the grains transform to equiaxed cry...; 关键词：Mg A1-Ti-C master alloy particle cluster grain refinement

Microstructure and properties of Al-0.70Fe-0.24Cu alloy conductor prepared by horizontal continuous casting and subsequent continuous extrusion forming被引量：6: 《Transactions of Nonferrous Metals Society of China》2015年第6期1763-1769,共7页张晓苑张辉孔祥鑫傅定发; Project(20130161110007) supported by the Doctoral Program of Higher Education of China; A novel process for manufacturing A1-0.70Fe-0.24Cu alloy conductor was proposed, which includes horizontal continuous casting and subsequent continuous extrusion forming （Conform）. The mechanical properties, electri...; 关键词：A1-0.70Fe-0.24Cu alloy horizontal continuous casting continuous extrusion forming MICROSTRUCTURE PROPERTY

Effect of cooling rate on solidification parameters and microstructure of A1-7Si-0.3Mg-0.15Fe alloy被引量：10: 《Transactions of Nonferrous Metals Society of China》2014年第6期1645-1652,共8页陈瑞石玉峰许庆彦柳百成; Projects (2005CB724105,2011CB706801) supported by the National Basic Research Program of China;Projects (10477010,51171089) supported by the National Natural Science Foundation of China;Projects (2009ZX04006-041-04,2011ZX04014-052) supported by the Important National Science&Technology Specific,China; The effects of cooling rate on the solidification parameters and microstructure of Al-7Si-0.3Mg-0.15 Fe alloy during solidification process were studied.To obtain different cooling rates,the step casting with five dif...; 关键词：aluminium alloys cooling rate thermal analysis solidification parameters MICROSTRUCTURE

Anisotropy of localized corrosion in 7050-T7451 Al alloy thick plate被引量：4: 《Transactions of Nonferrous Metals Society of China》2013年第9期2483-2490,共8页宋丰轩张新明刘胜胆韩念梅李东锋; Project(2012CB619502)supported by the National Basic Research Program of China; The corrosion anisotropy of 7050-T7451 A1 alloy thick plate in NaCI solution was investigated by immersion tests, slow strain rate testing （SSRT） technique, potentiodynamic and anode polarization measurements, optic...; 关键词：7050-T7451 A1 alloy thick plate microstructure corrosion anisotropy

Effect of pretreatment on electrochemical etching behavior of Al foil in HCl-H_2SO_4被引量：6: 《Transactions of Nonferrous Metals Society of China》2013年第4期1039-1045,共7页班朝磊何业东邵鑫杜鹃; Project supported by University New Materials Disciplines Constructions Program of Beijing Region,China;Project(51172102/E020801) supported by the National Natural Science Foundation of China; The aluminum foil for high voltage aluminum electrolytic capacitor was immersed in 0.5 mol/L H3PO4 or 0.125 mol/L NaOH solution at 40 ℃ for different time and then DC electro-etched in 1 mol/L HC1＋2.5 mol/L H2SO4 el...; 关键词：A1 foil POLARIZATION pitting corrosion electrochemical etching AI electrolytic capacitor

Electrosynthesis and physicochemical properties ofα-PbO_2-CeO_2-TiO_2 composite electrodes被引量：4: 《Transactions of Nonferrous Metals Society of China》2013年第4期1191-1198,共8页陈步明郭忠诚徐瑞东; Project(51004056) supported by the National Natural Science Foundation of China;Project(KKZ6201152009) supported by the Opening Foundation of Key Laboratory of Inorganic Coating Materials,Chinese Academy of Sciences;Project(2010ZC052) supported by the Applied Basic Research Foundation of Yunnan Province,China;Project(20125314110011) supported by the Specialized Research Fund for the Doctoral Program of Higher Education;Project(2010247) supported by Analysis & Testing Foundation of Kunming University of Science and Technology,China; In order to investigate the effect of solid particles dopants on physicochemical properties of α-PbO2 electrodes, a-PbO2 composite electrodes doped with nano-TiO2 and nano-CeO2 particles were respectively prepared on...; 关键词：A1 lead dioxide composite electrodes ELECTROCATALYSIS physicochemical property

Preparation of semi-solid A356 Al-alloy slurry by introducing grain process被引量：6: 《Transactions of Nonferrous Metals Society of China》2012年第6期1307-1312,共6页陈正周; A preparation technology of semi-solid metal slurry introducing grain process （IGP） was developed. The effects of processing parameters on the microstructures of the semi-solid A356 Al-alloy slurries were investigat...; 关键词：A356 AI alloy SEMI-SOLID introducing grain primary a（A1）

Fabrication of miniature helical gears by powder extrusion using gas atomized Zn-22%Al powder: 《Transactions of Nonferrous Metals Society of China》2012年第6期1313-1321,共9页LEE Kyung-Hun LEE Jung-Min PARK Joon-Hong KIM Byung-Min; Project (2010-0008-277) supported by the NCRC (National Core Research Center) Program through the National Research Foundation of Korea,funded by the Ministry of Education,Science,and Technology;Project (NRF-2009-K20601000004-09E0100-00410) supported by PNU-IFAM JRC; Powder extrusion, which is based on the superplastic behavior of Zn-22%A1 eutectoid alloy, was proposed to reduce the forming load and promises to provide fine microstructures in the manufacture of miniature helical g...; 关键词：helical gear powder extrusion gas atomized Zn-22%A1 powder SUPERPLASTICITY

高级检索 检索式检索

时间限定

期刊范围

学科限定全选

高级检索 检索式检索

时间限定

期刊范围

学科限定全选

A1

检索结果分析

下载全文

高级检索检索式检索

时间限定

期刊范围

学科限定全选

高级检索 检索式检索

时间限定

期刊范围

学科限定全选

A1

检索结果分析

下载全文

用户登录

高级检索检索式检索