supported by the Science and Technology Project of State Grid Corporation of China(Grant No.5400-202419199A-1-1-ZN)。
The particle packed bed energy storage system has advantages such as low costs and wide temperature ranges,which can be combined with solar thermal power generation systems to solve the inherent volatility and discont...
In this research paper,a solar air heater with triangular fins has been experimentally analysed and optimized.Initially,an experimental set-up of a solar air heater having triangular fins has been developed at the loc...
Ice accretion on surfaces of the aircraft and engine is a serious threat to the flight safety.In this paper,a novel hot air anti-icing method is proposed based on the porous foam.Taking the NACA0012 airfoil as an exam...
Spray evaporation of liquid fuels in a turbulent flow is a common process in various engineering applications such as combustion.Interactions between fuel droplets(discrete phase)and fluid flow(continuous phase)have a...
Compressed air energy storage(CAES)is an important technology in the development of renewable energy.The main advantages of CAES are its high energy capacity and environmental friendliness.One of the main challenges i...
We gratefully acknowledge the financial support provided by the University of Canterbury,New Zealand(grant no.CPS20-03-002,grant no.452DISDZ);National Research Foundation Singapore(grant no.NRF2016 NRF-NSFC001-102);Tao Cai would like to thank College of Engineering,University of Canterbury for providing PhD studentship.
The combustion of ammonia(NH3)has attracted wide interest in fuel vehicle engines,marine engines,and power generators to mitigate carbon dioxide emissions.Unfortunately,the relatively low laminar flame speed presents ...
The financial support for this work is provided by Sustainable Energy Company(http://www.sencom-tn.com),under the project:Smart Aero-voltaic System(SAV).
The PVT-air solar system simultaneously generates electrical and thermal energy.Therefore,increasing the cost-effectiveness of the system requires an appropriate choice of key parameters such as mass flow rate and air...
This work was supported by National Science and Technology Major Project(Project No.2017-Ⅲ-0007 and No.2017-Ⅲ-0002);Youth Innovation Promotion Association,Chinese Academy of Science(No.2019147).
In this work,the effects of fuel temperatures and pressure drops on the flow field and spray characteristics of a pressure-swirl atomizer were discussed using the Particle Imaging Velocimetry(PIV),Planar Laser Induced...
This work was supported by the Natural Science Foundation of Jiangsu Province(Grant No.BK20190752);the National Natural Science Foundation of China(Grant No.51905275);the Natural Science Foundation of Colleges and Universities in Jiangsu Province(Grant No.19KJB460020);the Faculty Research Funding of Nanjing Forestry University(Grant No.163040111);the Open Foundation of Jiangsu Wind Power Generation Engineering and Technology Center(No.Zk19-03-12).
This study numerically analyzed the heat transfer characteristics outside the condenser of a rotating heat pipe grinding wheel(RHP-GW).The goal of this investigation is to determine the optimal structure and parameter...
the partial support from UK EPSRC Manifest Project under EP/N032888/1,EP/P003605/1;a UK FCO Science&Innovation Network grant(Global Partnerships Fund);an IGI/IAS Global Challenges Funding(IGI/IAS ID 3041)。
Liquid air energy storage(LAES)has been regarded as a large-scale electrical storage technology.In this paper,we first investigate the performance of the current LAES(termed as a baseline LAES)over a far wider range o...