云南高校图书馆联盟文献共享服务平台- ALUMINIUM

检索规则说明：AND代表“并且”；OR代表“或者”；NOT代表“不包含”；(注意必须大写,运算符两边需空一格)

检索范例：范例一： (K=图书馆学 OR K=情报学) AND A=范并思　　　　范例二：J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual

全部期刊核心期刊 EI来源期刊 SCI来源期刊 CA来源期刊 CSCD来源期刊 CSSCI来源期刊

Influence of introducing Zr,Ti,Nb and Ce elements on externally solidified crystals and mechanical properties of high-pressure die-casting Al–Si alloy: 《International Journal of Minerals,Metallurgy and Materials》2025年第1期147-153,共7页Junjie Li Wenbo Yu Zhenyu Sun Weichen Zheng Liangwei Zhang Yanling Xue Wenning Liu Shoumei Xiong; financially supported by the National Natural Science Foundation of China(Nos.52175284 and 52474396);the National Key Research and Development Program of China(No.2022YFB3404201)。; High pressure die casting(HPDC)AlSi10Mn Mg alloy castings are widely used in the automobile industry.Mg can optimize the mechanical properties of castings through heat treatment,while the release of thermal stress aro...; 关键词：aluminium alloy high-pressure die-casting externally solidified crystals non-heat treatment

Influence of symmetric and asymmetric rolling on texture evolution of work-hardened AA 5xxx aluminium alloy: 《Transactions of Nonferrous Metals Society of China》2025年第1期30-44,共15页MatjažGODEC Stefan ZAEFFERER Jakob KRANER Črtomir DONIK Irena PAULIN; The textures and microstructures of hot-and cold-rolled sheets of an AA 5454 aluminium alloy were studied,with special attention paid to comparing the texture development for the symmetric and asymmetric cold rolling....; 关键词：crystallographic texture EBSD aluminium alloy symmetric/asymmetric rolling ANISOTROPY

Microstructure and mechanical properties of complex-shaped 7075 aluminium alloy prepared using modified polyoxymethylene-based feedstock: 《Transactions of Nonferrous Metals Society of China》2024年第12期3862-3875,共14页Heng ZOU Meng-xiong CHEN Yang FU Hui-wen XIONG Lei ZHANG Ke-chao ZHOU; supported by the National Key Research and Development Program of China(No.2021YFB3701900)。; Additives of dioctyl phthalate(DOP),ethylene bis-stearomide(EBS),and epoxy(EP)were selected to modify the surface of 7075 Al alloy powder.Functional groups in DOP and EBS form hydrogen bonds with hydroxyl groups on th...; 关键词：7075 aluminium alloy polyoxymethylene-based feedstock additives compression moulding metal injection moulding microstructure mechanical properties

Effect of joining temperature on microstructure and properties of Mg/Al diffusion bonded joints: 《China Welding》2024年第4期51-57,共7页Zhou Zheng Ding Yunlong Shao Wenjie Zhang Encheng; supported by Scientific Research Funding Project of the Education Department of Liaoning Province(LJ212410146074);Liaoning Provincial Department of Science and Technology Doctoral Initiation Fund(2021-BS-241).; Basing on vacuum diffusion bonding technique,Mg1 and Al1060 were welded under different welding temperatures.Inspection equipment such as scanning electron microscopy,energy dispersive spectroscopy,X-ray diffractomete...; 关键词：magnesium alloy aluminium alloy diffusion bonding MICROSTRUCTURE mechanical behavior

Influence of Al foil interlayer on performance of vacuum diffusion bonding joint of 6061 aluminium alloy被引量：1: 《Journal of Iron and Steel Research International》2024年第10期2404-2412,共9页Da-shuang Liu Jian-hua Xu Xiong-hui Li Ping Wei Yun Liang Jian Qin Hua-wei Sun Tian-ran Ding Zong-ye Ding Su-juan Zhong Lei Zhang Wei-min Long; supported by Joint Funds of the National Natural Science Foundation of China(Grant No.U22A20191);Anhui Provincial Natural Science Foundation(Grant No.2208085ME135);Guangdong Basic and Applied Basic Research Foundation(Grant No.2023A1515140124).; The vacuum diffusion bonding method was used to introduce Al foil as the middle layer,and 6061 aluminium alloy was vacuum diffusion bonding together.The typical microstructure characteristics and mechanical properties...; 关键词：6061 aluminium alloy Diffusion bonding INTERLAYER Joint performance Elemental diffusion

Double-peak age strengthening of an Al-Mg-Si-Zn alloy processed by laser powder bed fusion被引量：1: 《Journal of Materials Science & Technology》2024年第25期82-94,共13页Feipeng Yang Jianying Wang Tao Wen Shilong Huang Lei Zhang Jinhua Wu Jianming Zhen Ling Shan Xixi Dong Hailin Yang; financially supported by the National Natural Science Foundation of China(Grant No.52071343);the Leading Innovation and Entrepreneurship Team of Zhejiang Province-Automotive Light Alloy Innovation Team(No.2022R01018)are gratefully acknowledged.; Laser powder bed fusion(LPBF)with a high cooling rate delivers a huge potential in improving the solid solubility limit and subsequent precipitation strengthening.In this work,a double-peak age hardening was observed ...; 关键词：Additive manufacturing Aluminium alloy Microstructure Mechanical property Heat treatment

Numerical simulation of melt flow and temperature field during DC casting 2024 aluminium alloy under different casting conditions: 《China Foundry》2024年第4期387-396,共10页Jin-chuan Wang Yu-bo Zuo Qing-feng Zhu Jing Li Rui Wang Xu-dong Liu; financially supported by the National Natural Science Foundation of China(No.51674078)。; Casting speed,casting temperature and secondary cooling water flow rate are the main process parameters affecting the DC casting process.These parameters significantly influence the flow and temperature fields during ...; 关键词：aluminium DC casting flow field temperature field numerical simulation

Modeling and characterization on electroplastic effect during dynamic deformation of 5182-O aluminum alloy: 《Transactions of Nonferrous Metals Society of China》2024年第8期2455-2475,共21页Hong-chun SHANG Song-chen WANG Yan-shan LOU; the financial supports from the National Natural Science Foundation of China(Nos.52075423,U2141214).; The coupling effects of electrical pulse,temperature,strain rate,and strain on the flow behavior and plasticity of 5182-O aluminum alloy were investigated and characterized.The isothermal tensile test and electrically...; 关键词：machine learning aluminium alloy electroplastic effect coupling effect finite element analysis

Effectiveness of Sodium Silicate on the Corrosion Protection of AA7075-T6 Aluminium Alloy in Sodium Chloride Solution: 《Materials Sciences and Applications》2024年第4期53-65,共13页Francesco Rosalbino Giorgio Scavino Graziano Ubertalli; The influence of sodium silicate on the corrosion behaviour of aluminium alloy 7075-T6 in 0.1 M sodium chloride solution was studied by open circuit potential (OCP) and electrochemical impedance spectroscopy (EIS) tec...; 关键词：Aluminium Alloy 7075-T6 SILICATE Sodium Chloride Electrochemical Impedance Spectroscopy (EIS) Scanning Electron Microscopy (SEM)

Static and Thermal Analysis of Aluminium (413,390,384 and 332) Piston Using Finite Element Method: 《Modeling and Numerical Simulation of Material Science》2024年第1期1-38,共38页Offei David Inusah Jacob Kwaku Nkrumah Vincent Akolbire Atindana; The main objective of this research was to examine the suitability of aluminium alloy to design a piston of an internal combustion engine for improvement in weight and cost reduction. The piston was modelled using Aut...; 关键词：Von Mise stress Total deformation Aluminium alloy Thermal analysis. PISTON Static structural Heat fux

高级检索 检索式检索

时间限定

期刊范围

学科限定全选

高级检索 检索式检索

时间限定

期刊范围

学科限定全选

ALUMINIUM_ALLOY

检索结果分析

下载全文

高级检索检索式检索

时间限定

期刊范围

学科限定全选

高级检索 检索式检索

时间限定

期刊范围

学科限定全选

ALUMINIUM_ALLOY

检索结果分析

下载全文

用户登录

高级检索检索式检索