云南高校图书馆联盟文献共享服务平台- AM60

AM60: 作品数：81被引量：374H指数：10; 导出分析报告; 相关领域：金属学及工艺一般工业技术更多>>; 相关作者：闫洪胡勇陈国香陈翌庆康永林更多>>; 相关机构：南昌大学合肥工业大学华东交通大学北京科技大学更多>>; 相关期刊：《铸造技术》《功能材料》《金属热处理》《材料研究学报》更多>>; 相关基金：国家自然科学基金江西省教育厅资助项目国家重点基础研究发展计划国家高技术研究发展计划更多>>

挤压压力与浇注温度对AM60镁合金组织与性能的影响: 《特种铸造及有色合金》2025年第3期408-411,共4页肖嘉程廖志雄何志洪张伟恩肖志瑜; 广东省自然科学基金资助项目(2022A1515010558)。; 采用挤压铸造工艺制备AM60铸件,研究了挤压压力(40、80和120 MPa)和浇注温度(650、690和730℃)对合金组织与性能的影响,并对挤压态AM60镁合金的断裂机理进行了分析。结果表明,增大挤压压力可以细化α-Mg晶粒,并且使第二相分布更加均匀;...; 关键词：挤压铸造 AM60 显微组织力学性能

异步轧制温度对SPCC/AM60/SPCC复合板组织与性能的影响: 《热加工工艺》2023年第17期68-72,共5页曹通郑小平谢文杰禹鑫磊田亚强陈连生; 国家自然科学基金项目(51474091);河北省自然科学基金项目(E2017209121)。; 利用异步轧制工艺制备了SPCC/AM60/SPCC(镁/钢)层状复合板材,分析了轧制温度对复合板显微组织与显微硬度的影响规律,研究了复合界面的组织形态与元素分布规律。结果表明:轧制温度320~380℃、压下率50%、异速比1.31时,可制备出板形良好的...; 关键词：镁/钢复合板异步轧制轧制温度显微组织元素分布

Ti_(P)/AM60复合材料的组织与力学性能被引量：1: 《稀有金属材料与工程》2022年第12期4436-4445,共10页蒲冬梅陈先华叶俊镠刘春全赵杰潘复生; National Natural Science Foundation of China(52171103);Guangdong Major Project of Basic and Applied Basic Research(2020B0301030006);Graduate Research and Innovation Foundation of Chongqing,China(CYB21001);Fundamental Research Funds for the Central Universities(2020CDJDPT001)。; 采用超声振动辅助半固态搅拌法在不同搅拌速度下制备了钛颗粒增强AM60镁基复合材料。显微组织结果表明,加入Ti颗粒后,晶粒尺寸增大,Ti颗粒界面处析出Al8Mn5相,Ti颗粒与Mg基体的界面结构为结合良好的共格界面。拉伸试验结果表明,Ti_(P)/A...; 关键词：镁基复合材料 Ti颗粒半固态搅拌拉伸性能

SPCC/AM60/SPCC复合板热拉伸变形行为被引量：1: 《华北理工大学学报（自然科学版）》2022年第3期39-45,共7页刘泽成郑小平李红斌田亚强陈连生; 河北省钢铁联合基金(E2017209121)。; 为了研究SPCC/AM60/SPCC双金属多层复合板在不同变形温度、应变速率条件下的热拉伸变形行为,通过Gleeble 3500热模拟试验机对复合板板材进行热拉伸试验,利用扫描电子显微镜对AM60镁合金基体和SPCC钢基体的拉伸断口进行了表征。拉伸变形...; 关键词：复合板热拉伸 AM60镁合金应变速率敏感性指数

Deformation Characterization,Twinning Behavior and Mechanical Properties of Dissimilar Friction-Stir-Welded AM60/AZ31 Alloys Joint During the Three-Point Bending: 《Acta Metallurgica Sinica(English Letters)》2022年第5期727-744,共18页Junlei Zhang Han Liu Xiang Chen Qin Zou Guangsheng Huang Bin Jiang Aitao Tang Fusheng Pan; financially supported by the National Natural Science Foundation of China(No.52071035,U1764253)。; The AZ31 and AM60 alloys were used for dissimilar friction stir welding(FSW)in this study.The microstructure characteristics of the joint and its three-point bending performance were investigated.The electron backscat...; 关键词：Friction stir welding(FSW) Dissimilar joint Microstructure evolution Bending properties DEFORMATION

Comparison of the corrosion behavior of AM60 Mg alloy with and without self-healing coating in atmospheric environment被引量：6: 《Journal of Magnesium and Alloys》2021年第4期1224-1237,共14页Yingwei Song Dan Liu Weineng Tang Kaihui Dong Dayong Shan En-Hou Han; This work was supported by the National Natural Science Foundation of China(No.51671199);the National Key Research and Development Program of China(No.2016 YFB0301105).; Coatings on the surface of Mg alloys are inevitably damaged during their practical applications,and corrosion can easily initiate from the damaged areas to accelerate the failure of Mg parts.A dual self-healing coatin...; 关键词：Self-healing coating Micro-arc oxidation(mao)film Atmospheric corrosion Mg alloy Inhibitor Sediments

Properties inhomogeneity of AM60 magnesium alloy processed by cyclic extrusion compression angular pressing followed by extrusion被引量：9: 《Transactions of Nonferrous Metals Society of China》2021年第3期655-665,共11页Siroos AHMADI Vali ALIMIRZALOO Ghader FARAJI Ali DONIAVI; A new severe plastic deformation(SPD)technique for improvement of the metallurgical properties of the magnesium alloys is presented.In this process,a cyclic extrusion compression angular pressing(CECAP)process is foll...; 关键词：cyclic extrusion compression angular pressing AM60 alloy strain distribution mechanical properties grain refinement

Microstructure Distribution and Tensile Anisotropy of Dissimilar Friction Stir Welded AM60 and AZ31 Magnesium Alloys被引量：1: 《Acta Metallurgica Sinica(English Letters)》2020年第11期1487-1504,共18页Jun-Lei Zhang Han Liu Yu-Lu Xie Guang-Sheng Huang Xiang Chen Bin Jiang Ai-TaoTang Fu-Sheng Pan; financially supported by the National Key Research and Development Plan(No.2016YFB0301104);the National Natural Science Foundation of China(Nos.51671041,51531002,U1764253)。; The microstructure distribution,tensile anisotropy and fracture behaviors in the dissimilar friction stir welded joint of AM60/AZ31 alloys were investigated.Experimental results showed that a significant grain refinem...; 关键词：Friction stir welding Dissimilar joint TEXTURE ANISOTROPY Tensile properties

Effect of Ca on microstructure and high temperature creep properties of AM60-1Ce alloy被引量：1: 《China Foundry》2019年第2期88-96,共9页Wei Jin Yu-lai Song Yao-hui Liu Ping Zhao R.D.K.Misra; financially supported by the National Natural Science Foundation of China(Grant No.50901035);the Science and Technology Development Projects of Jilin Province(Grant No.20140204042GX);the China Postdoctoral Science Foundation(Grant No.2018M642625); A series of AM60-1Ce-xCa(x=0, 0.5, 1.5, 2.5) magnesium alloys were prepared by gravity casting method and analyzed by means of XRD, DSC and SEM. The effects of Ca on normal temperature mechanical properties and high t...; 关键词：AS-CAST magnesium ALLOY Al2Ca HARD phase mechanical PROPERTIES high temperature CREEP PROPERTIES

SIMA法制备半固态AM60-2Nd镁合金组织的演变被引量：2: 《热加工工艺》2018年第17期20-24,共5页丁志强苏桂花程世利刘学然陆展; 高校人才引进资助项目(kjc2012016);江苏高校品牌专业建设工程资助项目(PPZY2015A025);国家自然科学基金资助项目(51701174);国家自然科学基金资助项目(51405417); 主要研究了等温温度和等温时间对应变诱导熔化激活法制备的半固态AM60-2Nd合金组织演变的影响。结果表明,在230℃以45%的压缩比压缩变形后,组织呈明显的纤维流线状,针状Al11）Nd3相被拉长、碎断成颗粒状不连续分布在晶界上。随着等温温...; 关键词：AM60合金 Nd元素应变诱导熔化激活法半固态等温处理

高级检索 检索式检索

时间限定

期刊范围

学科限定全选

高级检索 检索式检索

时间限定

期刊范围

学科限定全选

AM60

检索结果分析

下载全文

高级检索检索式检索

时间限定

期刊范围

学科限定全选

高级检索 检索式检索

时间限定

期刊范围

学科限定全选

AM60

检索结果分析

下载全文

用户登录

高级检索检索式检索