supported by the National Natural Science Foundation of China(Grant Nos.22278081,22008034,U2005215,and 22378069);Fujian Science and Technology Major Project(2020HZ07009);the Natural Science Foundation of Fujian Province,China(Grant Nos.2023J01066 and 2022J05027);the Talent Program of Fuzhou University(XRC-22036);Fujian Science and Technology Innovation Key Project(2022G02012).
Ammonia is an exceptional fuel for solid oxide fuel cells(SOFCs),because of the high content of hydrogen and the advantages of carbon neutrality.However,the challenge lies in its unsatisfactory performance at intermed...
The authors would like to acknowledge Future Energy Systems Research Initiative(Grant Number RES0031233);grant PID2019-107106RB-C32 funded by MCIN/AEI/10.13039/50110001103 for financial support of the research carried out at the University of Alberta and Instituto de Nanociencia y Materiales de Aragón(CSIC-Unizar)and during preparation of the current manuscript.
Nickel–yttria stabilized zirconia(Ni–YSZ)cermet is the most commonly used anode in solid oxide fuel cells(SOFCs).The current article provides an insight into parameters which affect cell performance and stability by...
supported by the National Natural Science Foundation of China(Grant No.51772272);Natural Science Funds for Distinguished Young Scholar of Zhejiang Province(Grant No.LR20E020001);Startup Foundation for Hundred-Talent Program of Zhejiang University;Pearl River S&T Nova Program of Guangzhou(Grant No.201710010143)。
The development of fast rechargeable lithium ion batteries(LIBs)is highly dependent on the innovation of advanced high-power electrode materials.In this work,for the first time,we report a sacrificial NiO arrays templ...
supported financially by the Key R & D Program of Jiangsu Province (No.BE2017098);the Natural Science Foundation of Jiangsu Province (No.BK20170847);the Top-notch Academic Programs Project of Jiangsu Higher Education Institutions;the Start-Up Fund of Nanjing University of Science and Technology
In this work, a multi-layer anode supported solid oxide fuel cell(SOFC) is designed and successfully prepared through sequential tape casting and co-firing. The single cell is consisted of NiO-3 YSZ(3 YSZ: 3 mol.% ytt...
WS2/carbon nanofibers (WS2/CNFs) are obtained by a simple electrospinning method in which few-/ single-layer WS2 is uniformly embedded in carbon fibers. When used as the active anode material for Li-ion cells, these...
Fabrication process for anode supported planar PEN of intermediate temperature solid oxide fuel cell (SOFC) was introduced, in which tape casting and screen printing methods were used. Gd2O3 doped CeO2(GDC) powders we...