the financial support from the National Natural Science Foundation of China(No.51671189);the Ministry of Science and Technology of China(Nos.2017YFA0700703 and 2019YFA0705304)。
The effects of strain rate on the microstructural evolution and deformation mechanism of a Ni-Co based superalloy were investigated by isothermal compression tests performed atγ'sub-solvus(1090℃)andγ'super-solvus t...
the National Science and Technology Major Project of the Ministry of Science and Technology of China(No.2018-ZX04044001-008);the National Natural Science Foundation of China(No.52075328).
The hot forming behavior,failure mechanism,and microstructure evolution of in-situ TiB_(2)particle-reinforced 7075 aluminum matrix composite were investigated by isothermal compression test under different deformation...
financially supported by the National Key Research and Development Program of China(No.2016YFB0301104);the National Natural Science Foundation of China(Nos.51531002,51301173 and 51601193);the National Basic Research Program of China(‘‘973 Program’’,No.2013CB632202)
Multi- and unidirectional impact forgings were successfully applied to a (GW94) Mg-RE alloy. The microstructure and texture evolution were investigated systematically. The obtained results indicated that during unid...
financially supported by the National Basic Research Program of China(No.2011CB012903)
The dynamic recrystallization behavior of 25CrMo4 steel was systematically investigated by compression deformation at different temperatures and strain rates on a Gleeble 1500 thermal mechanical simulation tester. The...
financially supported by the National Science and Technology Major Project of China (No. 2012ZX04012011);the National Natural Science Foundation of China (No. 51375306);the National Basic Research Program of China (No. 2011CB012903);the Shanghai Science and Technology Innovation Action Plan (No. 14521100600)
The hot deformation behavior of extruded AZ80 magnesium alloy was investigated using compression tests in the temperature range of 250–400 °C and strain rate range of 0.001–1.000 s–1. The 3D power dissipation map ...
Project(2012CB619500)supported by the National Basic Research Program of China
The dynamic recrystallization behavior of 7085 aluminum alloy during hot compression at various temperatures (573?723 K) and strain rates (0.01-10 s^-1) was studied by electron back scattered diffraction (EBSD...
Project(51274184)supported by the National Natural Science Foundation of China;Project(2013CB632205)supported by the National Basic Research Program of China
The hot deformation behavior of as-cast Mg-8Zn-1Al-0.5Cu-0.5Mn alloy was studied by hot compression tests at temperatures of 200-350 °C and strain rates of 0.001-1 s-1.The results show that the flow stress increases ...
Project(2011CB706802)supported by the National Basic Research Program of China;Project(2012ZX04010-081)supported by National Science and Technology Major Program of China
A modified cellular automaton(CA) program was developed to simulate the process of dynamic recrystallization(DRX) for 23Co13Ni11Cr3Mo ultrahigh strength steel.In this model,influences of deformation parameters on hard...
Project(2012CB619505)supported by the National Basic Research Program of China
The hot deformation behavior of 7A55 aluminum alloy was investigated at the temperature ranging from 300 ℃ to 450 ℃ and strain rate ranging from 0.01 s-1 to 1 s-1 on a Gleeble-3500 simulator. Processing maps were es...
Sponsored by National Basic Research Program of China(2010CB630804);National High Technology Research and Development Program of China(2012AA03A501)
The hot deformation behavior of a new heat resistant steel Gl15 designed for 650 ℃ ultra-supercritical (USC) power plants was experimentally studied. Hot compression test was carried out in the temperature range of...