fnancially supported by the Scientifc Research Project of the Department of Education in Hunan Prov ince,China(Grant No.23B0533).
In this work,fow behavior and dynamic recrystallization(DRX)mechanism of a low carbon martensitic stainless bearing steel,CSS-42L,were investigated using a thermomechanical simulator under the temperature and strain r...
National Key Research and Development Program of China (No. 2021YFB3700803);State Key Laboratory of Powder Metallurgy,Central South University,Changsha,China。
The high-temperature compression deformation behavior of Ti−6Al−4V−0.5Mo−0.5Zr alloy was investigated at temperatures from 890 to 1030℃ and strain rates from 0.01 to 10 s^(−1),and the corresponding dynamic recrystall...
financial support from the National Natural Science Foundation of China(Nos.52233018 and 51831002);the China Baowu Low Carbon Metallurgy Innovation Foudation(No.BWLCF202213)。
The influence of Nb-V microalloying on the hot deformation behavior and microstructures of medium Mn steel(MMS)was investigated by uniaxial hot compression tests.By establishing the constitutive equations for simulati...
financial supports from the National Natural Science Foundation of China(Nos.52161023,51901204);Science and Technology Project of Yunnan Precious Metal Laboratory,China(No.YPML-2023050208);Yunnan Science and Technology Planning Project,China(Nos.202201AU070010,202301AT070276,202302AB080008,202303AA080001);Postgraduate Research and Innovation Foundation of Yunnan University,China(No.2021Y338).
The hot deformation behavior of Pt−10Ir alloy was studied under a wide range of deformation parameters.At a low deformation temperature(950−1150℃),the softening mechanism is primarily dynamic recovery.In addition,dyn...
co-supported by the National Natural Science Foundation of China(Nos.52105411,52105400and 52305420);the China Postdoctoral Science Foundation(No.2023M742830);Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University(No.CX2023008).
In this study,a new linear friction welding(LFW)process,embedded LFW process,was put forward,which was mainly applied to combination manufacturing of long or overlong loadcarrying titanium alloy structural components ...
funded by the National Science Foundation of China(Grant No.12172144);the National Key Laboratory of Shock Wave and Detonation Physics(Grant No.2023JCJQLB05403);Key Laboratory of Extreme Material Dynamics Technology(Grant No.2024SCKT1204).
Adiabatic shear band(ASB),a typical failure mechanism in a metal at high strain rates,is hardly controllable or predictable to some extent.The development of the microstructure plays a crucial role in its formation.In...
supported by National Natural Science Foundation of China(Nos.92160301,92360309);Science Center for Gas Turbine Project(Grant No.P2022-AB-Ⅳ-001-002);Shaanxi Provincial Key Research and Development Program(No.2021ZDLGY10-06);Innovation Capability Support Program of Shaanxi(Program No.2022TD-60).
Excellent surface integrity is an eternal pursuit in high performance manufacturing, with microstructure being a crucial component of the surface integrity dataset and a key factor controlling surface properties such ...
Project supported by the National Natural Science Foundation of China(52201074,52475344,52171115,U20A20275);the Natural Science Foundation of Hunan Province(2024JJ5644,2023JJ50109)。
To clarify the mechanical behavior and deformation mechanism of rare earth magnesium(Mg)alloy WE43 under extreme service loads,high-speed impact tests under various deformation temperatures and loading paths were cond...
Project supported by National Natural Science Foundation of China(U23A20541,52261135538,51971071,U21A2049,52271098);National Key Research and Development Program of China(2021YFE0103200);Fundamental Research Funds for the Central Universities(3072022QBZ1002)。
The thermal compression deformation behavior of Mg-6Li-11Zn-2.5Y alloy was systematically investigated by using the isothermal hot compression tests using the Gleeble-3500 thermal mechanical physical simulation system...
supported by the National Key Research and Development Program of China(Grant No.2023YFB3710103);Science and Technology Program of Jiangsu Provincial Administration for Market Regulation(Grant No.KJ2024004).
This paper investigates the dynamic recrystallization characteristics of SAE52100 large section bearing steel under hot compression,focusing on both the center and surface.Using data from thermal simulation experiment...