MG-LI

作品数:138被引量:475H指数:12
导出分析报告
相关领域:金属学及工艺一般工业技术更多>>
相关作者:张密林崔建忠彭晓东于化顺张伟更多>>
相关机构:哈尔滨工程大学重庆大学东北师范大学东北大学更多>>
相关期刊:更多>>
相关基金:国家自然科学基金国家重点基础研究发展计划国家高技术研究发展计划国家教育部博士点基金更多>>
-

检索结果分析

结果分析中...
条 记 录,以下是1-10
视图:
排序:
Mg-Li-Al-Gd合金时效析出行为的电子显微研究
《有色金属设计》2025年第1期122-126,共5页郅露寒 刘林林 刘翠秀 段志萌 
北京市自然科学基金资助项目(No.2212024)。
利用HAADF-STEM、EDS等多种电子显微表征技术,对固溶和时效态的Mg-30Li-2Al-0.2Gd(LAG3020)合金进行了显微结构表征。结果显示,铸态LAG3020合金经过固溶处理后,在基体中观察到大量平均直径约为100nm的片状(Mg,Li)3Al相,这些析出相的形...
关键词:MG-LI-AL合金 时效析出 时效软化 相变 
稀土Ce微合金化强化的Mg-Li基合金组织与力学性能
《材料与冶金学报》2025年第1期75-81,88,共8页纪春杰 李姗姗 谢红波 任玉平 
国家自然科学基金青年基金项目(52101129).
为了开发低成本、高强韧的超轻Mg-Li基合金,利用稀土Ce微合金化制备了超轻Mg-5.5Li-xCe(x=0,0.25,0.5,质量分数,%)三组合金.结果表明:微量Ce的添加可以显著细化合金的晶粒,当Ce添加量(质量分数,下同)为0.5%时,挤压态合金的再结晶晶粒尺...
关键词:MG合金 Mg-Li基合金 微合金化 微观组织 力学性能 
挤压态Mg-Li-Al-Y-Zr-Gd-Nd合金组织及热变形行为研究
《精密成形工程》2025年第1期68-79,共12页高诗情 万元元 王艳彬 刘鹏 李明 邢志辉 杜传航 夏祥生 
重庆市杰出青年科学基金(ctsc2021jcyj-jqX0008)。
目的对挤压态Mg-Li-Al-Y-Zr-Gd-Nd合金显微组织进行表征,通过镁锂合金单向热压缩实验,研究挤压态Mg-Li-Al-Y-Zr-Gd-Nd合金的热变形行为,建立合金的本构方程及加工图。方法采用SEM和EBSD等分析测试手段对挤压态合金进行显微组织观察和分...
关键词:镁锂合金 热压缩 显微组织 本构方程 加工图 
直接时效对激光增材制造Al-Cu-Mg-Li-Sc-Zr合金组织与性能的影响
《材料热处理学报》2024年第12期48-57,共10页吴祖胜 刘燕 高建宝 章媛洁 张金良 宋波 史玉升 
国家重点研发计划(2023YFB4604800);国家自然科学基金(52275331,52201041,52401047);湖北省重点研发计划(2022BAA011);中国博士后科学基金(2021M690061,2023M741244)。
采用光学显微镜、扫描电镜、透射电镜、显微硬度计和和万能材料试验机等研究了直接时效对激光选区熔化制备的Al-Cu-Mg-Li-Sc-Zr合金显微组织和力学性能的影响。结果表明:经直接时效热处理后,Al-Cu-Mg-Li-Sc-Zr合金中析出了大量针状和球...
关键词:激光选区熔化 Al-Cu-Mg-Li-Sc-Zr合金 直接时效 显微组织 力学性能 
Influence of power dissipation value and deformation activation energy on recrystallization in compression deformation behavior of Mg-Li-Zn-Y alloy被引量:1
《Journal of Rare Earths》2024年第12期2341-2349,I0006,共10页Di An Bingyu Qian Ruizhi Wu Xiang Wang Legan Hou Xiaochun Ma Jinghuai Zhang 
Project supported by National Natural Science Foundation of China(U23A20541,52261135538,51971071,U21A2049,52271098);National Key Research and Development Program of China(2021YFE0103200);Fundamental Research Funds for the Central Universities(3072022QBZ1002)。
The thermal compression deformation behavior of Mg-6Li-11Zn-2.5Y alloy was systematically investigated by using the isothermal hot compression tests using the Gleeble-3500 thermal mechanical physical simulation system...
关键词:MG-LI Constitutive model Processing map Dynamic recrystallization Rare earths 
Strength and elastic modulus enhancement in Mg-Li-Al matrix composites reinforced by ex situ TiB2 particles via stir casting被引量:1
《Journal of Magnesium and Alloys》2024年第9期3574-3588,共15页Jiawei Sun Dehua Ding Wencai Liu Guohua Wu Hongjie Liu Guangling Wei Hezhou Liu 
supported by the National Natural Science Foundation of China(Nos.51821001 and U2037601);Major Scientific and Technological Inno-vation Projects in Luoyang(No.2201029A);Foundation Strengthening Plan Technical Field Fund(No.2021-JJ-0112);Shanghai Jiao Tong University Student Innovation Prac-tice Program(No.IPP24076).
A novel Mg^(-1)0Li-3Al(wt.%,LA103)matrix composite reinforced by ex situ micron TiB_(2) particles was developed in the present study.The ball milling and cold pressing pretreatment of the reinforcements made it feasib...
关键词:Mg-Li composite Stir casting Elastic modulus Microstructure Mechanical properties 
Microscopic and mesoscopic deformation behaviors of dual-phase Mg-Li-Gd alloys
《Journal of Materials Science & Technology》2024年第27期1-15,共15页Jing Li Li Jin Fulin Wang Chuhao Liu Huamiao Wang Jie Dong 
support from the National Natural Science Foundation of China(Grant Nos.52071206,U2241231,and 52305506).
The Mg-Li dual-phase alloys, comprised of hexagonal (HCP) and body-centered cubic (BCC) phases, exhibit a better combination of strength and ductility than Mg single-phase alloys. In this work, the deformation behavio...
关键词:Mg-Li-Gd dual-phase alloy HDI stress Yield strength ELONGATION EVPSC simulation 
Microstructural evolution and its influence on mechanical and corrosion behaviors in a high-Al/Zn containing duplex Mg-Li alloy after friction stir processing被引量:1
《Journal of Materials Science & Technology》2024年第17期245-255,共11页Yixing Zhu Mengran Zhou Yingxin Geng Shun Zhang Tongzheng Xin Gaoqiang Chen Yifan Zhou Xiaoyu Zhou Ruizhi Wu Qingyu Shi 
supported by the National Natural Science Foundation of China(grant Nos.U23A20541 and 52305385).
Ultralight Mg-Li alloys offer promising applications across various fields.Mg-Li alloys enriched with Al and Zn hold theoretical potential for achieving excellent mechanical strength and corrosion resistance.However,t...
关键词:Mg-Li-Al-Zn alloy Friction stir processing Microstructure evolution Thermal-mechanical stability Corrosion behavior 
SLM成形Al-Mg-Li-Cu合金残余应力及组织性能被引量:2
《特种铸造及有色合金》2023年第3期313-317,共5页孙金娥 贺亚飞 
天津市教育科研计划资助项目(2021KJ605)。
通过阿基米德排水法以及试验测试综合分析选区激光熔融成形Al-Mg-Li-Cu合金的致密度、微观形貌和硬度等组织性能特征,探究了打印参数对合金残余应力的影响。结果表明,当粉末层厚(T)、激光功率(P)、舱口间距(H)逐渐增加时,残余应力逐渐...
关键词:选区激光熔融 Al-Mg-Li-Cu合金 残余应力 致密度 硬度 
An efficient Hauser-base electrolyte for rechargeable magnesium batteries
《Journal of Energy Chemistry》2023年第1期1-10,I0001,共11页Mingxiang Cheng Yaru Wang Duo Zhang Shuxin Zhang Yang Yang Xuecheng Lv Jiulin Wang Yanna NuLi 
financial support from the National Natural Science Foundation of China(Nos.21975159,2157316);the Shanghai Aerospace Science and Technology Innovation Fund(No.SAST2018-117);the Oceanic Interdisciplinary Program of Shanghai Jiao Tong University(No.WH410260401/006)。
Rechargeable magnesium batteries(RMBs)are considered the promising candidates for post lithium-ion batteries due to the abundant storage,high capacity,and dendrite-rare characteristic of Mg anode.However,the lack of p...
关键词:Rechargeable magnesium batteries Mg-Li dual-salt electrolyte Hauser-base In-situ synthesis Lewis acid–base reaction CuS cathode 
检索报告 对象比较 聚类工具 使用帮助 返回顶部