Funded by the Fundamental Research Program of Shanxi Province(Nos.202103021224282 and 202103021223288);the Central Government Guides Local Funds for Science and Technology Development(Nos.YDZJSX20231A045 and YDZJSX2024D053)。
In order to clarify the effect of rare earth Gd on the microstructure evolution and deformation behavior of 7075 aluminum alloy during hot compression,uniaxial compression tests of Al-Zn-Mg-Cu-0.5%Gd were conducted at...
Funded by the National Key R&D Program of China(Nos.2021YFB3700804,2021YFB3700803);Shaanxi Provincial Innovation Capability Support Plan(No.2023KJXX-091)。
Characterization of hot deformation behavior of Ti-6Al-4V-0.5Ni-0.5Nb titanium alloy was investigated through isothermal compression at various temperatures from 750 to 1050℃and strain rate from 0.01 to 10 s^(-1).The...
Funded by the Central Government Guides Local Funds for Science and Technology Development(No.YDZJSX20231A045);the Fundamental Research Program of Shanxi Province(Nos.202103021223288 and 202103021224282)。
The evolution of microstructure during hot deformation is key to achieving good mechanical properties in aluminum alloys.We have developed a cellular automaton(CA) based model to simulate the microstructural evolution...
Funded by the National Natural Science Foundation of China(No.51774006)。
High-temperature tensile tests were conducted for high corrosion resistant weathering steel S450EW.The morphologies of fracture microstructures,dislocations and precipitates were investigated by field emission scannin...
Funded by the National Key R&D Program of China(Nos.2016YFB0300803,2016YFB0300903);the National Program of China(No.2012CB619504)
To investigate the dynamic recrystallization behavior of 7xxx aluminum alloys,the isothermal compression tests were carried on the 7056 aluminum alloy in the temperatures range of 320-440℃and in the strain rates rang...
Funded by the Fundamental Research Funds for the Central Universities(Nos.HEUCFP201731 and HEUCFP201719);the"One Three Five"Equipment Pre-research National Defense Science and Technology Key Laboratory Fund(No.KZ42180125)。
The hot deformation behavior of an ultralow-carbon microalloyed steel was investigated using an MMS-200 thermal simulation test machine in a temperature range of 1073-1373 K and strain rate range of 0.01-10 s-1.The re...
Funded by the National Natural Science Foundation of China(No.51575372)
Hot deformation behavior of as-cast Mn18Cr18 N austenitic stainless steel was studied in the temperature range of 950-1200 ℃ and strain rate range of 0.001-1 s^(-1) using isothermal hot compression tests. The true ...
Funded by National Natural Science Foundation of China(Nos.51275221 and 51175231);the Natural Science Foundation of Jiangsu Province,China(No.BK2011261);Qing Lan Project,Jiangsu Province,China;the Applied Science Foundation of Changzhou City,Jiangsu Province,China(No.CJ20159051)
In order to study the mechanism of grain refinement induced by laser shock processing (LSP) in AZ31 magnesium alloy, the specimens were processed with Nd:glass pulse laser shocking and the microstructures of LSP sp...
Funded by the National Natural Science Foundation of China(Nos.51222405 and 51474063)
The microstructure evolution and formability of Ti-10V-2Fe-3Al alloy related to the initial microstructures and processing variables were investigated during hot forming process. The experimental results show that the...
Funded by North University of China;the National Natural Science Foundation of China(Nos.51174251,51201154);the Natural Science Foundation of Shanxi Province,China(No.2013011014-1)
Hot compression tests of low carbon steel were carried out on Gleeble-3500 system in the temperature range from 750 to 900 ℃ and in the strain rate range from 0.001 to 1.0 s^-1, and the associated microstructural evo...