supported by the Materials and Components Technology Development Program(No.20024843);funded by the Ministry of Trade,Industry,and Energy(MOTIE,South Korea);the National Research Foundation of Korea(NRF)grant(No.RS-2023-00244478);funded by the Ministry of Science,ICT,and Future Planning(MSIP,South Korea).
This study investigated the influence of the addition of Al to a Mg-7Bi(B7,wt%)alloy,particularly its recrystallization behavior during extrusion and its resulting mechanical properties.The addition of 2 wt%Al to the ...
support from the Key Technology Research and Development Program of Shandong Province(Project No.2019GGX102060).
This study investigated the formation mechanism of new grains due to twin–twin intersections in a coarse-grained Mg–6Al–3Sn–2Zn alloy during different strain rates of an isothermal compression.The results of elect...
the Deutsche Forschungsgemeinschaft(DFG)for financial support(MO 848/18-2)。
The deformation mechanisms and dynamic recrystallization(DRX)behavior of specifically grown bicrystals with a symmetric 90°<1010>and 90°<1120>tilt grain boundary,respectively,were investigated under deformation in p...
funded by the National Natural Science Foundation of China (Project 52271092);the Chongqing Science and Technology Commission (cstc2021jcyj-msxm X0814,CSTB2022NSCQ-MSX0891);the Chongqing Municipal Education Commission (KJQN202101523);the support from The Ohio State University。
The effects of small additions of calcium (0.1%and 0.5%~1) on the dynamic recrystallization behavior and mechanical properties of asextruded Mg-1Mn-0.5Al alloys were investigated.Calcium microalloying led to the forma...
supported by National Key Research and Development Program of China (No.2023YFB3710900);National Natural Science Foundation of China (Nos.U2241235,U2167213,51971053);funded by the Project of Promoting Talents in Liaoning province (No.XLYC2203202);the financial assistance from Young Elite Scientists Sponsorship Program by CAST (2019-2021QNRC001,2019-2021QNRC002,2019-2021QNRC003);the fund from the Fundamental Research Funds for the Central Universities (N2202020)。
Low absolute strength becomes one major obstacle for the wider applications of low/no rare-earth(RE) containing Mg alloys. This review firstly demonstrates the importance of grain refinement in improving strength of M...
supported by the National Key Research and Development Program of China (No.2021YFB3701100);the National Key Research and Development Program of China (Grant No.2018YFE0115800);the National Natural Science Foundation of China (Grant No.52105412)。
Featured initial microstructures of Mg-11Gd-4Y-2Zn-0.5Zr alloy(wt%) were obtained by adjusting temperatures of solid solution and cooling methods, including island intergranular 18R and 14H LPSO phases with low-densit...
the financial support from the National Natural Science Foundation of China (51875317,52222510);Key Research and Development Program of Shandong Province (2021ZLGX01)。
The tensile tests of the extruded ZK60 Mg containing a longitudinal weld seam were carried out at room and elevated temperatures, and the effects of induced microstructure inhomogeneity on tensile deformation behavior...
funded by the Postgraduate Research & Practice Innovation Program of Jiangsu Province (No.SJCX22_1720);the National Natural Science Foundation of China (No.51901204);the Chongqing Science and Technology Commission (Nos.cstc2020jcyj-msxmX0184 and cstc2019jscx-mbdxX0031);the University Innovation Research Group of Chongqing (No.CXQT20023)。
The fundamental research on thermo-mechanical conditions provides an experimental basis for high-performance Mg-Al-Ca-Mn alloys.However, there is a lack of systematical investigation for this series alloys on the hot-...
This work was supported by the Changsha University Talent Introduction Project(50800-92808);the Excellent youth project of Hunan Provincial Department of Education(19B055,18B418,19C0156);the Natural Science Foundation of Hunan Province of China(2020JJ4645).
Flow softening behavior of a homogenized Mg-7Gd-4Y-1Nd-0.5Zr alloy under compression to a final strain of∼1.8 at elevated temperatures of 450∼550℃ and a constant strain rate of 2s^(−1) has been investigated by opti...
supported by the National Research Foundation of Korea(NRF)grant(No.2019R1A2C1085272)funded by the Ministry of Science,ICT and Future Planning(MSIP,South Korea).
This study investigates the effects of extrusion temperature on the dynamic recrystallization(DRX)behavior of a Mg-3Al-1Zn-0.3Mn(AZ31,wt%)alloy during hot extrusion and on the microstructural characteristics and mecha...