Funded by the National Natural Science Foundation of China(Nos.U1332110 and 50971038);the Project of"Liaoning Bai Qian Wan Talents Program"of China(No.2013921071)
It was aim to investigate the interfacial microstructure and shear performance of Ti/Cu clad sheet produced by explosive welding and annealing. The experimental results demonstrate that the alternate distribution of i...
Supported by the National Natural Science Foundation of China(No.51165032);the Innovative Group of Science and Technology of College of Jiangxi Province(No.00008713)
The effects of addition of La on the microstructure of as-cast ADC12 A1-Alloy were investigated by using optical microscope (OM), X-ray diffraction (XRD), scanning electron microscope (SEM), and energy disperse ...
Funded by the Innovation Fund for Outstanding Scholar of Henan Province(No.0621000700)
The microstructure of a spray deposited intermetallic compound alloy of Ni-Al-Mo system(Ni3Al-Mo intermetallic compound alloy) prepared by a spray atomization deposition was studied in detail by using optical metall...
Funded by the Natural Science Fundation of Southeast University(9212002232)
Silicide coating was prepared on electro-deposited nickel layer by the slurry pack cementation process on copper matrix at 1173 K for 12 h using SiO2 as Si source, pure Al powder as reducer, a dual activator of NaF+N...
Four types of steel sheets containing 0.04%, 0.09%, 0. 14% and 0.36% Si, respectively, were electrodeposited with a nickel layer of 3 tam in thickness and then galvanized in molten Zn at 450℃ for various periods of t...
Synthesis of Ni/Al system intermetallic compound under the influence of pulsating electric current is researched.Reactions of Ni/Al system intermetallic compound are analyzed.It is found that solid-state reactions occ...
NiAl intermetallic compound and its alloys are synthesized by SHS. Affection of parameters on the synthe-sis process is discussed. XRD, SEM and EPMA are used to study microstructure of the synthesized materials. Resul...