废纸脱墨废水活性污泥处理动力学研究  

Process Model of Activated Sludge Treatment of Effluents in Waste Paper Deinking

作　　者：陈金中[1] 陈中豪[1] 刘明友[1] 

机构地区：[1]华南理工大学造纸与环境工程学院,广州510641

出　　处：《中国造纸学报》2001年第1期97-101,共5页Transactions of China Pulp and Paper

摘　　要：对废水活性污泥处理的动力学模型进行了剖析 ,并分别以CODCr和BOD5为底物 ,通过试验确定脱墨废水活性污泥处理的动力学系数。试验结果也显示 :完全混合式活性污泥处理后 ,脱墨废水CODCr和BOD5的去除率分别为 88 1%和 93 4%The process model of activated sludge treatment of effluent in waste paper deinking was analyzed in this paper, and the process coefficients were determined corresponding to the COD Cr or BOD 5 as organic materials. The experimental results showed that the removal rates of the COD Cr and BOD 5 in this waste water reach 88.1% and 93.4% respectively with continuous flow and stirred tank model.

关 键 词：活性污泥处理 BOD5 废纸脱墨废水 CODC 完全混合式 去除率 动力学研究 水活性 底物 显示 

分 类 号：TS201.1[轻工技术与工程—食品科学] X703[轻工技术与工程—食品科学与工程]