退火对溅射ZnO薄膜的形貌和内应力的影响  

Effect of annealing on surface morphology and residual stress of sputtered ZnO thin film

作　　者：常春荣[1] 李子全[1] 徐芸芸[1] 周衡志[1] 骆心怡[1] 

机构地区：[1]南京航空航天大学材料科学与技术学院,南京210016

出　　处：《功能材料与器件学报》2006年第2期95-98,共4页Journal of Functional Materials and Devices

基　　金：南京大学近代声学国家重点实验室基金(No.0102)

摘　　要：用超高真空射频磁控溅射技术制备了高C轴取向的ZnO薄膜,用扫描电镜和X射线衍射仪分别研究了退火对ZnO薄膜形貌和内应力的影响。结果表明:适当温度退火后薄膜的形貌和内应力得到改善,通过增氧、缺陷原子的热激活和晶粒融合等可以有效地降低薄膜中由热效应、缺陷效应和粒子注入效应等引起的张应力,薄膜组织致密化并且柱状晶粒取向趋于一致。450℃退火的ZnO薄膜具有最低的张应力和最佳的结晶质量。Highly C -axis oriented ZnO thin films were prepared by high -vacuum RF magnetron sputtering technique. The effect of annealing temperatures on the surface morphology and residual stress of ZnO thin film was studied by SEM and XRD. Results show that the surface morphology and residual stress of appropriately annealed film are improved. By introduction of oxygen, heat activation of defect atoms and combination of small grains, the tensile stress in the film induced by heat effect, defect effect and inpouring effect of particles decreases significantly. The grain microconstituent is compacted and the orientation of crystal- grain- columns increases. The minimum residual tensile stress and the optimal crystalline quality of ZnO thin film are obtained by being annealed at 450℃.

关 键 词：ZNO薄膜 退火 形貌 内应力 

分 类 号：O484.4[理学—固体物理]