检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]中国科学院地质与地球物理研究所工程地质力学重点实验室,北京100029 [2]中国地震局防灾科技学院,北京101601
出 处:《岩土工程学报》2007年第12期1767-1771,共5页Chinese Journal of Geotechnical Engineering
基 金:国家自然科学基金资助项目(90302011);广东省地质科学研究基金资助项目(2006211)
摘 要:基于塑性极限分析上限定理,依据岩质边坡沿某一滑裂面滑动破坏时,在其内部产生沿陡倾角结构面(断层、节理和层面)的剪切破坏现象,建立了岩质边坡极限分析斜分条法破坏模式。进一步根据滑体处于极限状态时的虚功率方程,推导得出了斜分条后岩质边坡的塑性极限分析稳定系数计算公式。采用超载系数的方法,将稳定系数表示在块体所受的极限荷载,避免了隐式出现,有效地简化了公式推导。以锦屏一级水电站右岸边坡为例进行了稳定性分析。计算表明,结论较为合理,对于具有倾斜界面的岩质边坡稳定性评价具有重要意义。Based on plasticity limit analysis by upper bound theorem, a new method to analyze rock slope stability was put forward. It was known that the inside of rock mass would generate shear failure along some old steep discontinuities (faults, joints and bedding planes) when sliding damage took place. According to the phenomena and virtual work rate equation in limit state, a different failure mode of inclined slices technique was established, and the computing formula of safety factor was also derived using the theory of plasticity limit analysis. By means of overload factor, the safety factor of slope stability could be easily expressed by the critical loads. As a result, not only the implicit expression could be avoided, but also the safety factor could be calculated simply and effectively. As a practical engineering example, the right bank slope of Jinping First Stage Hydro power station was analyzed, It was shown that the new method was accurate and significant for rock slope with inclined interfaces.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.147