纤维基纳米结构材料的界面性能  

Interface Property of Nano-Structured Materials on Fiber Substrate

作　　者：邓炳耀[1,2] 刘江峰[1] 魏取福[1] 高卫东[1] 晏雄[2] 

机构地区：[1]江南大学生态纺织教育部重点实验室,江苏无锡214122 [2]东华大学,上海200051

出　　处：《高分子材料科学与工程》2008年第11期79-82,共4页Polymer Materials Science & Engineering

基　　金：科技部项目(NCSTE-2006-JKZX-015);教育部生态纺织重点实验室开放基金(KLET0608);江苏省自然科学基金资助项目(BK2008106)

摘　　要：试验研究超声波处理对采用磁控溅射技术在涤纶纺粘非织造材料表面生长Al掺杂ZnO（AZO）纳米结构材料界面性能的影响。结果表明，纤维在温水（45℃～50℃）中经超声波处理30min后，纤维表面“粗化”，表面性能得到了改善，形成了许多极其细微的凹槽，纳米结构薄膜在生长时，犹如在纤维上生了“根”。从而提高了纤维与纳米结构薄膜的界面结合牢度。The effect of the ultrasonic treatment on interface property of aluminum-doped zinc oxide （AZO） nano-structured materials grown on PET nonwovens by magnetron sputtering was investigated. The results show that the surface of the pretreated fibers becomes rough with a lot of narrow grooves when the fibers are treated by ultrasonic in the warm water （45℃ -50 ℃; ）with 30 minutes. Therefore, as the nanofilms deposited on the substrate, the grains seem growing on it with ＂roots＂. Thus, the binding strength of interface is improved. According to the surface properties of the fibers, ultrasonic pretreatment is adopted to improve the bond strength of the interface.

关 键 词：纤维 磁控溅射 超声波处理 界面 性能 

分 类 号：TS174.8[轻工技术与工程—纺织材料与纺织品设计]