深海采矿集矿装置的倾角监控  

Dip Angle Monitoring of Collecting Device for Deep Ocean Mining

作　　者：王爱武[1] 

机构地区：[1]长沙矿山研究院

出　　处：《矿业研究与开发》1998年第2期29-33,共5页Mining Research and Development

摘　　要：在深海采矿中，会遇到海底地形的起伏、倾斜变化，利用感应电路和判别电路进行采样，就可感应和判别出倾角大小及倾角方向的变化，然后由数据处理模板把采样数据送入测控数据库，结合集矿头高度参数进行运算，经功放后，分别控制集矿头上摆或下摆的电磁阀启动、停止，完成倾角调整。采样数据经ＤＭＣＳ网通讯接口，送至监督级操作站数据库，经数据、图像处理后，送至显示器显示，并输出地形变化趋势图形，为准确操纵集矿装置提供依据。n ocean mining the variation of topographic undulation and incline of oceanbottom can be encountered,but induction circuit and discriminating circuit can be used to collect sampleddata,then feel out and discriminate the degree and direction of incline.The dataprocessor module sends the sampleddata into the data base for monitoring and carry out calculation in the light of the height parameters of collector head,after the magnification of power,respectively to control the start and stop of solenoid valves for collector head upswinging or downswinging so as to complete the adjustment of the dip angle of collector head.The sampleddata will be sent to the date base of the supervisory operating console through the communication interface of DMCS net,after the processing of data and pictures,then sent to displays to give out the trend picture of topographic variation so as to provide basis for the accurate control of collecting device.

关 键 词：深海采矿 集矿头 倾角 测控 集矿装置 

分 类 号：TD424[矿业工程—矿山机电] TD857.2