在面内压力作用下点腐蚀低碳钢板的非线性有限元分析(英文)  

Nonlinear FEM Analysis of Pitted Mild Steel Square Plate Subjected to In-plane Compression

作　　者：江晓俐[1] C. GUEDES SOARES 

机构地区：[1]武汉理工大学交通学院,武汉430063 [2]里斯本科技大学船舶与海洋工程研究中心

出　　处：《船舶力学》2009年第3期398-405,共8页Journal of Ship Mechanics

基　　金：Supported by the National Natural Science Foundation of China (No. 50809053);Wuhan University of Technology Science Fund and the Scientific Research Foundation for the Returned Overseas Chinese Scholars, Ministry of Education ofChina (No. 331(2006))

摘　　要：无论是军船还是民船,船体及主要结构构件表面的点腐蚀对于船舶结构强度和安全性都有较大的破坏作用。文中采用系列非线性有限元计算研究了点腐蚀对于低碳钢板极限抗压强度的影响,模型中计及板初始缺陷的影响,详细讨论了板和点腐蚀物理、几何特性的变化对于板极限承载能力的作用。研究发现在众多影响因素中(例如点腐蚀的直径和深度、板的柔度系数等),点腐蚀密集度指标DOP对于板的极限承载能力有主要和直接的影响。此外,在腐蚀环境恶劣的情况下,厚低碳钢板的使用不一定如预期的那样能延长其使用期限。Pitting corrosion of the steel plates forming the hull and other major structural components of both commercial and naval ships can have a very considerable deteriorating effect on ship structural safety. In this paper, a series of nonlinear FEM analysis is carried out to investigate the effects of pits on ultimate compressive strength of plates,where main influential factors of both plates and pits are studied in detail. The results show that the intensity of pits denoted by DOP （the ratio percentage of the corroded surface area to the original plate surface area） has significant and direct impact on degradation of ultimate capacity of plates among other factors, i.e., size, depth of pits, slenderness of plate, etc. Thicker plate （β=1.34） possibly has higher capacity than thinner plate （β=2.34 or 3） even if DOP of the former is considerably larger than the later,say, as much as 15.45%. However, thickness effect seems neglectable with increasing slenderness to 3 or so. With this regard, DOP is effective and sufficient to denote the effect of pits on ultimate compressive strength of mild steel thin plates.

关 键 词：点腐蚀 非线性有限元方法 板的柔度系数 面内压力 

分 类 号：U661.4[交通运输工程—船舶及航道工程]