基于UGNX4.0的整体叶轮曲面造型  

Research on Surface Modeling of Integral Impeller Based on UGNX4.0 Software

作　　者：阎长罡[1] 贾国高[1] 

机构地区：[1]大连交通大学机械工程学院,辽宁大连116028

出　　处：《大连交通大学学报》2009年第5期6-10,共5页Journal of Dalian Jiaotong University

基　　金：辽宁省教育厅高等学校科学技术研究计划资助项目(2008115)

摘　　要：应用三次B样条曲线对图纸所给的叶片中性面上的轴盘曲线和盖盘曲线上的离散数据点进行插值,得到轴盘曲线和盖盘曲线,将曲线上的对应点相连得到直纹面形式的叶片中性面;根据图纸给出的叶片上不同点的厚度值,构造轴盘曲线和盖盘曲线的左右偏置曲线,进而得到直纹面形式的叶片曲面.最后将计算所得数据导入UGNX4.0软件,应用此软件对整体叶轮进行实体建模.By interpolation cubic B-spline is applied into the data points of the top and root of the blade neutral surface, to construct the neutral surface of the blade by connecting the corresponding points. According to the blade thickness, variable distance offset curves of the shroud line and the hub line are obtained, and the blade surface is constructed which also can be pressed by ruled surface. The solid modeling of the integral impeller is conducted based on UGNX4.0 software.

关 键 词：整体叶轮 B样条 插值曲线 

分 类 号：TP391.72[自动化与计算机技术—计算机应用技术]