检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:孙新超[1] 杨波[1] 许源[2] 杨健[1] 赵榆林[2] 王晶[1] 王翠敏[1]
机构地区:[1]昆明理工大学生命科学与技术学院,云南昆明650224 [2]昆明理工大学化工学院,云南昆明650224
出 处:《林产化学与工业》2010年第3期73-77,共5页Chemistry and Industry of Forest Products
基 金:云南省应用基础研究基金资助项目(2009ZC045M)
摘 要:采用超临界CO2流体萃取技术,研究紫苏油提取工艺条件,利用β-环糊精超临界微胶囊技术,研究紫苏油超临界包合一体化工艺条件。研究结果表明,制备紫苏油微胶囊的优化条件为:紫苏籽超临界萃取紫苏油的超临界压力23 MPa,β-环糊精最佳超临界包合压力12 MPa;包合反应时间180 min,包合反应温度55℃,萃取剂CO2流量40 L/min。按此条件制得的紫苏油环糊精包合物,α-亚麻酸包合率为16.37%,最高包合物质量分数为16.42%,最高包合比(β-环糊精与紫苏油物质的量比)达1.84∶1;平均包合物质量分数为13.94%,平均包合比1.55∶1。Perilla oil was extracted with supercritical CO2 extraction,and the supercritical conditions for integrated inclusion of perilla oil was researched using β-cyclodextrin microcapsulation technology.The results show that the optimum conditions were: supercritical extraction pressure of perilla oil 23MPa,the optimum β-cyclodextrin inclusion supercritical pressure 12MPa,inclusion reaction time 180min,inclusion reaction temperature 55℃,extractant CO2 flow rate 40L/min.α-Lindenic acid inclusion rate is 16.37%,the maximum ratio of mass fraction of β-cyclodextrin/perilla oil is 16.42%,the highest molar complexation ratio(β-cyclodextrin/perilla oil) amounts to 1.84∶1(molar ratio of material),average mass fraction of perilla oil/β-cyclodextrin is 13.94%,and the average complexation ratio is 1.55∶1(molar ratio of material).
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.53