烧结镍工艺的应用研究  

Nickel Powders Paint Firing on Al_2O_3 Metallizing

作　　者：刘征[1] 黄亦工[1] 陈新辉[1] 蔡安富[1] 

机构地区：[1]北京真空电子技术研究所,北京100015

出　　处：《真空电子技术》2010年第4期18-23,共6页Vacuum Electronics

摘　　要：二次金属化工艺现多采用电镀镍工艺技术,镍层在金属化层中所起的作用:优化焊料对金属化层的润湿,保护金属化层免于焊料的侵蚀,增强焊接强度和真空气密性。本文以生产实践为基础探讨获得镍层的工艺技术之异同及实用效果之比对。braze braze. effect paint. to wet Most on the ：After firing of metalizing,the samples were coated with a thin layer of nic the metallizing, improve seal strength and vacuum tight, prevent metali of them were made using an electroplated layer of nicket but this did not seal strength and vaccum tight, when competed with seals made with fi kel which zing pene helps the tr appear to h ring nickel ated by ave any powder

关 键 词：Al2O3瓷 金属化 烧结镍 

分 类 号：TB756[一般工业技术—真空技术]