位标器干扰力矩的分析与自适应补偿  

Analysis and adaptive compensation of seeker disturbance torque

作　　者：周桃品[1] 李友年[1] 

机构地区：[1]中国空空导弹研究院,河南洛阳471009

出　　处：《红外与激光工程》2013年第7期1830-1834,共5页Infrared and Laser Engineering

基　　金：总装精导预研基金

摘　　要：干扰力矩做为影响导引头隔离度的重要参数,对制导系统产生了重要影响,在快响应制导系统设计中,要求尽可能降低干扰力矩的影响。针对干扰力矩的非线性、非定常特性,位标器稳定平台建模误差以及制导回路约束,提出干扰力矩自适应补偿控制方法。设计思路为:由制导精度分析,得到隔离度的频带约束;通过状态滤波及制导指令中引入非破坏性抖动信号,估计干扰力矩的主导项:滚动摩擦力矩;然后,运用带通滤波、状态反馈方法补偿非期望的干扰力矩。仿真结果表明:在参数摄动条件下,滚动摩擦力矩系数估值精度、快速性满足要求;提出的自适应补偿设计方法更贴近工程实际,能够用于解决寄生耦合影响严重的问题。As an important parameter affecting the isolation of seeker,disturbance torque had an importanteffect on guidance system, so it was demanded to reduce the disturbance torque＇ s effect on designing offast guidance system. According to the nonlinear and nonsteady characteristics of the disturbance torque,modeling errors of stabilized platform and guidance-loop constrains, a control method of disturbancetorque adaptive compensation was proposed. The design ideas were as follows： band constraints ofdisturbance rejection rate obtained from guidance precision analysis, and scroll friction （dominant term ofthe disturbance torque） was estimated by use of state filtering and a nondestructive dither signal additionon guidance command, then, bandpass filtering and state feedback were used to compensate for unwanteddisturbance torque effects. The simulation results show that, the estimation accuracy and rapidity of scrollfriction coefficient can meet guidance system＇s demand under the condition of parameter perturbation, andthe adaptive compensation method presented can be applied to more realistic case where cross-couplingeffects are important.

关 键 词：干扰力矩 寄生耦合 自适应补偿 卡尔曼滤波 

分 类 号：TJ765.3[兵器科学与技术—武器系统与运用工程]