谷物联合收割机电控全液压转向系统建模与仿真  

Modeling and simulation of electronic control full hydraulic steering system for grain combine harvester

作　　者：张成涛[1,2] 谭彧[1] 吴刚[1] 王书茂[1] 

机构地区：[1]中国农业大学工学院,北京100083 [2]广西科技大学汽车与交通学院,柳州545006

出　　处：《农业工程学报》2013年第20期11-17,共7页Transactions of the Chinese Society of Agricultural Engineering

基　　金：高等学校博士学科点专项科研基金项目(20110008110009)

摘　　要：为研究谷物联合收割机视觉导航系统中电控全液压转向系统的操纵性能,该文介绍了联合收割机视觉导航系统结构,在建立了电控全液压转向系统各组成部分的数学模型基础上,构建了系统的仿真模型,并进行了Simulink仿真。仿真结果表明:联合收割机的侧向速度和横摆角速度的稳态值与实车试验结果一致,横摆角速度稳态值约为-12.5°/s,侧向速度稳态值约为-0.25 m/s,二者的稳态误差小于5%;在信号瞬态响应过程中,仿真与实车试验的过渡时间相同,约为1.8 s,仿真试验的侧向速度及横摆角度的响应速度皆快于实车试验结果,但二者总体变化趋势相同。所建立的系统模型准确、可靠,较好地反映了联合收割机转向时动静态特性,为联合收割机视觉导航转向控制器设计提供参考依据。In recent years, combine harvester navigation system based on machine vision had important significance in improving the harvesting efficiency of combine harvester, reducing the labor intensity of the driver and so on. In order to realize the automatic steering control of the combine operation path, it is necessary to reconstruct the original hydraulic steering system of combine harvester. To analyze the steering performance of the modified electronically controlled hydraulic steering system for combine harvester in visual navigation system, mathematical models of the electronically controlled hydraulic steering system were established after introducing the structure of combine harvester visual navigation system. The system was mainly composed of combine harvester body, full hydraulic steering, steering transmission mechanism and hybrid stepping motor. In this paper, the mathematical models of the parts were established respectively. The steering model of combine harvester was firstly simplified to linear 2-DOF rear wheel steering vehicle model, and the basic handling dynamics model of combine harvester was established. Then, the dynamic mathematical model of simplified hydraulic steering system was given in the analysis of the fully hydraulic steering work principle for combine harvester. And then, the static model of the steering transmission mechanism was established according to its geometrical structures. Finally, the stepping motor model was simplified as an inertial system according to the step response performance, and its transfer function was given. The electronically controlled hydraulic steering system was simulated through the joint simulation method of each mathematical model by Simulink software. In order to verify the correctness of simulation models, the dynamic response characteristics of steering system was tested with the steering wheel angle step input of 90~ on Xinjiang 2A combine harvester. In the real vehicle test, vehicle yaw rate was obtained by the vertical gyroscope, the lateral veloci

关 键 词：联合收割机 机器视觉 导航 建模 仿真 电控全液压转向 

分 类 号：S225[农业科学—农业机械化工程]