检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:孙丽娜[1] 詹成胜[1,2] 冯佰威[1,2] 沈通[1]
机构地区:[1]武汉理工大学交通学院,武汉430063 [2]武汉理工大学高性能船舶技术教育部重点实验室,武汉430063
出 处:《船舶工程》2015年第5期7-10,26,共5页Ship Engineering
基 金:国家自然科学基金重点项目(51039006);国家自然科学基金项目(51279147;51479223;51179143;51479150)
摘 要:采用分层次优化,首先以总阻力最小为优化目标对某三体船侧体横向和纵向的相对位置进行了优化研究,得到阻力性能最优的三体船侧体布局方案;然后基于侧体最优布局,进行型线优化,最终完成三体船的侧体布局和型线的序列优化。结果表明,所采用的三体船侧体布局及型线优化方法具有可行性,可为三体船船型设计提供参考依据。Adopting the hierarchical optimization, the paper firstly studies on the optimization design of the relative positions of horizontal and vertical side hull of the trimaran, with the minimum total resistance as the optimization objective. The side hull location scheme of the optimal resistance performance is obtained Then hull line optimization is carried out based on the side hull optimal location. Finally, the optimization of side hull location and hull line of the trimaran are completed The results indicate that the optimization method of the trimaran side hull location and hull line optimization method adopted in the paper is feasible, which can provide reference for trimaran ship type design.
关 键 词:三体船 侧体布局 型线优化 径向基函数(RBF)插值
分 类 号:U662.2[交通运输工程—船舶及航道工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.200