EBZ160型掘进机驱动油缸实测载荷分析  

Load Analysis of Driving Cylinder for EBZ160 Roadheader Based on Measured Data

作　　者：李旭[1] 王苏彧[1] 吉晓冬[1,2] 杨阳[1,2] 崔静波[2] 吴淼[1] 

机构地区：[1]中国矿业大学(北京)机电与信息工程学院,北京100083 [2]石家庄煤矿机械有限责任公司,石家庄050031

出　　处：《煤炭技术》2016年第5期250-252,共3页Coal Technology

基　　金：国家重点基础研究发展计划(973计划)(2014CB046300)

摘　　要：利用自主研发的大容量数据记录仪,采集了EBZ160型掘进机煤矿井下实际工作时的截割臂位姿和升降、回转油缸的工作油压等数据。通过对实测数据进行分析,得到不同工况实测位姿下驱动油缸对截割机构作用力的大小,分析出各个工况对应的危险位姿。The self-developed large capacity data recorder was used to acquire the data of cutting arm posture and oil pressure when EBZ160 roadheader working in coal mine. With the analysis of the measured data, the forces acting on cutting mechanism by the driving cylinder in the measured positions under different working conditions were worked out, and the corresponding dangerous postures were analyzed.

关 键 词：掘进机 驱动油缸 载荷 实测数据 危险位姿 

分 类 号：TD421.5[矿业工程—矿山机电]