井下铲运机动臂有限元分析  

Finite Element Analysis for the Frame of Flood-prevention Bagging Machine

作　　者：史蕾蕾[1] 

机构地区：[1]山东理工大学交通与车辆工程学院,山东淄博255049

出　　处：《科技视界》2016年第24期140-140,共1页Science & Technology Vision

摘　　要：利用Pro/E软件建立井下铲运机动臂的三维模型,以ANSYS Workbench为基本工具,实现了井下铲运机动臂的有限元分析。通过有限元计算,得到动臂在插入工况、举升工况、卸载工况下的应力分布情况。结果表明材料特性满足设计强度要求。证明采用的有限元分析方法可行,可将该法应用于实际的井下铲运机动臂设计中。Using Pro/E software to build 3 D model of the swing of underground LHD,then the swing through the finite, element analysis with ANSYS Workbench as the basic tools.The stress distribution conditions of swing under the insert condition,lifting and unloading conditions is obtained by finite element calculation.The result shows that the strength of the material properties meet the design requirements.h proves that the finite element analysis method is available so the method can be applied to the actual swing design.

关 键 词：井下铲运机 动臂 ANSYS WORKBENCH 有限元分析 

分 类 号：TP273[自动化与计算机技术—检测技术与自动化装置]