轮齿修形对兆瓦级风电齿轮箱NVH性能的影响  

The effect of gear modification on the NVH characteristics of a megawatt level wind turbine gearbox

作　　者：刘华朝 朱才朝[1] 柏厚义 

机构地区：[1]重庆大学机械传动国家重点实验室,重庆400030 [2]望江工业有限公司,重庆400071

出　　处：《振动与冲击》2016年第24期158-163,188,共7页Journal of Vibration and Shock

基　　金：中央高校基本科研业务费资助(106112015CDJXY110008);国家十二五科技支撑计划资助项目(2012BAA01B05)

摘　　要：随着风电齿轮箱技术的快速发展,对动态性能要求越来越高,NVH分析技术对减小风电齿轮箱振动噪声有着重要意义。根据某兆瓦级风电齿轮箱传动原理和基本结构特点,考虑行星架、箱体等结构的柔性,通过结合部节点将结构系统与传动系统连接起来,建立风电齿轮箱系统耦合分析模型。基于载荷谱对各级齿轮副进行修形,对比分析修形前后风电齿轮箱的NVH性能,表明修形后齿轮箱的振动加速度幅值、噪声均有一定程度的减小,为风电齿轮箱的NVH优化提供了依据。With the technology of wind turbine gearbox developing rapidly,more and more requirements for good dynamic characteristics are needed. The NVH analysis technology is important in reducing vibration noise of wind turbine gearbox. According to the principle of a megawatt wind turbine gearbox and the characteristics of the structure,considering the influence of the flexibility of structural components such as the carrier and gearbox to NVH characteristics,connecting the structure system with transmission system by the nodes of combination, NVH analysis model was established. Gear modification was done on all load conditions of spectrum in every stage. NVH characteristics before and after gear modifying were analyzed. The result shows that the amplitude of vibration acceleration and structural noise of the wind turbine gearbox reduce after gear modification. The research provides basis for NVH characteristics optimization.

关 键 词：兆瓦级风电齿轮箱 轮齿修形 NVH性能 

分 类 号：TH132[机械工程—机械制造及自动化]