二甲醚发动机仿真建模与试验研究  

Simulation modeling and experimental research of DME engine

作　　者：熊江勇 李重重 吴君华[3] 

机构地区：[1]南京信息职业技术学院汽车工程学院,江苏南京210023 [2]南京审计大学金审学院,江苏南京210023 [3]南京林业大学交通与汽车学院,江苏南京210037

出　　处：《佳木斯大学学报（自然科学版）》2017年第5期817-819,共3页Journal of Jiamusi University：Natural Science Edition

基　　金：江苏省高等学校自然科学研究项目资助(17KJD470002)

摘　　要：为进一步提高二甲醚发动机(DME)仿真建模准确性,结合WD615柴油发动机的特性,提出一种二甲醚发动机建模方法,并通过试验验证模型建立的准确性。基于AVL FIRE建立WD615柴油发动机仿真模型。选取缸内最高温度、最高压力和氮氧化物最大和最小排放量为评价指标,通过二甲醚发动机排放试验,验证模型的正确性。仿真与试验结果表明,采用AVL FIRE建立的WD615柴油发动机仿真模型与试验结果基本吻合,最高温度、最高压力、氮氧化物最大和最小排放量误差分别为2.36%、3.35%、1.05%和2.28%,从而验证二甲醚发动机仿真建模的准确性。In order to further improve the dimethyl ether engine simulation modeling accuracy, this paper puts forward a method of dimethyl ether engine modeling combining with the characteristic of WD615 diesel engine, and the accuracy of the model is validated by the experiment. WD615 diesel engine simulation model is set up based on the AVL FIRE. Selecting the highest temperature, the maximum pressure in cylinder and of minimum and maximum nox emissions as evaluation index, to verify the correctness of the model by dimethyl ether engine emission test. Simulation and experimental results show that the AVL FIRE of WD615 diesel engine simu- lation model is consistent with the test results, the highest temperature, pressure and nox emissions of minimum and maximum error are 2.36%, 3.35%, 1.05% and 2.36% respectively, so as to verify the exactness of the dimethyl ether engine simulation modeling.

关 键 词：二甲醚发动机 柴油发动机 仿真建模 AVL FIRE 试验验证 

分 类 号：U448.21[建筑科学—桥梁与隧道工程]