检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:杨畅 陈伟[1] 尹永智[1] 李洪亮[1] 母智深[1] 高飞
机构地区:[1]内蒙古蒙牛乳业(集团)股份有限公司,呼和浩特011500
出 处:《中国食品添加剂》2017年第12期143-152,共10页China Food Additives
摘 要:研究双重发酵果味酸奶中添加剂的使用量对体系稳定性的影响,分别使用离心沉淀法和稳定性分析图谱法来衡量体系稳定性。添加剂最佳使用量的单因素试验结果为:果胶2 g/kg,结冷胶0.3 g/kg,PGA 0.6g/kg,CMC 5g/kg。在此基础上,以稳定性图谱斜率作为评价指标,对添加剂使用量的工艺进行响应面优化实验,确定最佳配比条件为:果胶用量1.94 g/kg,结冷胶用量0.01 g/kg,PGA的用量0.58 g/kg,CMC用量0.44g/kg,在此条件下,斜率理论值为0.9767,实际进行三次验证试验,斜率为0.9802±0.0171。响应面能较好的实现工艺过程的优化。The effect on the addition of different additives to the stability of double fermentation fruit yogurt system was studied. Centrifugal sedimentation method and Lumisizer stability method were used to measure the stability of the system. The result of the single factor experiment was as follows: pectin 2 g/kg ~gellan gum 0.3 g/kg PGA 0.6 g/kg CMC 5 g/kg. Based on above, response surface method was applied to optimize the addition of four additives. Finally, the optimized condition was as follows : pectin 1.8 g/kg t gellan gum 0.01 g/kg t PGA 0.58 g/kg CMC 0.44 g/kg. In this condition, the slope of Lumisizer stability analysis graph was 0.9802 ± 0.0171 which has a small difference with the prediction result (0.9767) from the response surface method. In conclusion, response surface method could be applied for process optimization.
分 类 号:TS202.3[轻工技术与工程—食品科学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.191.103.248