力控组态编程实现油箱模型PID控制研究  

Research on PID control of oil tank model based on ForceControl configuration programming

作　　者：刘先平 柴细元 郭智勇[3] 张志攀[4] 韩明明 LIU Xian-ping;CHAI Xi-yuan;GUO Zhi-yong;ZHANG Zhi-pan;HAN Ming-ming(Logging Branch ofCNPC Bohai Drilling Engineering CO.LTD., Tianjin 300280, China;Post Doctoral Research Station, China University of Petroleum, Beijing 102249, China;School of Mechatronic Engineering in Southwest Petroleum University, Cheng du 610500, China;Research Institute of Exploration and Development, Dagang Oilfield Company, CNPC , Tianjin 300280, China)

机构地区：[1]中国石油渤海钻探工程有限公司测井分公司,天津300280 [2]中国石油大学(北京)博士后科研流动站,北京102249 [3]西南石油大学机电工程学院,四川成都610500 [4]大港油田公司勘探开发研究院,天津300280

出　　处：《电子设计工程》2018年第7期138-141,146,共5页Electronic Design Engineering

基　　金：中国石油天然气集团公司项目(2016D-3801);渤海钻探工程有限公司博士后科研工作站项目(2016B02K)

摘　　要：基于传统组态软件在实现复杂的PID控制算法方面存在不足,以力控组态软件为平台,通过研究PID控制算法原理以及力控组态软件的运行机制,在力控组态软件平台上编程实现PID控制算法,并基于力控组态软件平台建立油箱模型对控制算法实现可行性进行验证。结合模型实验控制曲线,表明力控编程实现PID控制算法有效,验证了力控组态编程实现PID控制算法的可行性。There are some deficiencies in realizing complex PID control algorithm based on traditional configuration software. Against this background, a research based on the configuration software of ForceControl was carried out to examine the implementation of control algorithms. By firstly studying the theory of PID control algorithm and the operating mechanism of ForceControl, a PID control was successfully programmed on the platform. In order to verify the effectiveness of the programmed algorithm, a control model of oil tank was established. The control curve observed in the experiment proves that the programmed algorithm works perfectly, thus revealing the feasibility of implementing PID control algorithms using ForceControl platform.

关 键 词：组态软件 PID控制 力控 编程 

分 类 号：TN98[电子电信—信息与通信工程]