复合材料机器人纤维铺放工艺参数优化  

Optimization of Process Parameters for Robotic Fibre Placement

作　　者：赵盼[1] 史耀耀[1] 康超[1] 俞涛 邓博 张宏基[1] 陈振[1] Zhao Pan;Shi Yaoyao;Kang Chao;Yu Tao;Deng Bo;Zhang Hongji;Chen Zhen(School of Mechanical Engineering,Northwestern Polytechnical University,Xi＇an 710072,China)

机构地区：[1]西北工业大学机电学院,陕西西安710072

出　　处：《西北工业大学学报》2018年第4期693-700,共8页Journal of Northwestern Polytechnical University

基　　金：国家自然科学基金(51375394)资助

摘　　要：相较于复合材料结构件传统加工方法的劳动密集型和耗时性,机器人纤维铺放技术大大的提高了复合材料成型过程的灵活性,允许制造更为复杂的结构。基于热塑性复合材料机器人纤维铺放成型工艺过程研究,分别对成型过程中紧密接触过程与融合过程进行理论分析,提出影响铺放制品质量的关键工艺参数:热气炬温度、铺放压力和铺放速度;针对圆柱形零件轴向0°铺放成型过程,以层间粘结强度为优化目标,根据响应面法设计实验,建立工艺参数耦合对层间粘结强度影响模型,通过方差分析验证了模型可靠性及有效性,进而获得纤维铺放成型最优工艺参数;实验研究表明,在最优工艺参数作用下,层间剥离力最高为24.1 N,铺放制品粘结强度最高。Compared with labour-intensive and time-consuming processing of conventional fabrication methods, the robotic fiber placement process greatly improves the flexibility of the fiber placement process and allows for the con- struction of more complex structures. Based on the study of the placement process, the intimate contact process and healing process were analysed theoretically. The key process parameters for affecting the quality of the composite component were put forward： hot gas torch temperature, compaction force and laying velocity. In order to analyse the fabrication process for laying the cylindrical parts with 0-degree tow direction, the model of the process parameters coupling affected the interlaminar bond strength was established, according to the design of the response surface method. The reliability and validity of the model were verified by the analysis of variance. The optimal process parameters of fiber placement were obtained. The results show that the model is effective and the optimum peeling force of the laying products is 24.1 N under the optimum process parameters.

关 键 词：预浸丝束 纤维铺放 工艺参数优化 响应面法 层间粘结强度 方差分析 实验设计 

分 类 号：TB332[一般工业技术—材料科学与工程]