基于Arduino+labview的多路自动浇花系统的设计与实现  

Implementation of Multi-channel Automatic Watering System Based on Arduino+Labview

作　　者：沈一栋 周志伟 毛攀峰[1] Shen Yidong;Zhou Zhiwei;Mao Panfeng(Zhejiang International Maritime College,Zhoushan,316021,China)

机构地区：[1]浙江国际海运职业技术学院

出　　处：《浙江国际海运职业技术学院学报》2018年第3期54-56,共3页Journal of Zhejiang International Maritime College

基　　金：2017年浙江省大学生科技创新活动计划暨新苗人才计划项目(项目编号:2017R473004)

摘　　要：为解决花卉在没人看管的情况下也能实现自给补水，设计了多路自动浇灌系统。该系统采用Labview为上位机，Arduino为下位机相结合的控制模式。系统运行时，土壤湿度传感器先对盆栽土壤进行参数采集，再经Arduino对采集数据信号进行分析判别，若盆栽需要浇灌，舵机将带动浇灌臂在盆栽的指定位置进行浇灌，直至湿度达到标准值，最后将浇灌后的湿度值通过蓝牙传输至labview上位机显示。本系统先后经过模拟仿真和实地检测等测试，测试结果达到预期设计要求，系统运行稳定。In order to solve the problem that the flowers can realize self sufficiency hydration without any care, a multi-channel automatic watering system is designed. The system adopts Labview as the upper computer and Arduino as the lower control mode. When the system is running, the soil moisture sensor collects the parameters of the potted soil firstly, and then analyzes and discriminates the data collected by Arduino. If the pot needs to be watered, the steering gear will drive the pouring arm to water at the designated position of the pot until the humidity reaches the standard value, and finally the humidity will be poured. The value is transmitted to the labview host computer via Bluetooth. The system has been tested by simulation and field test, and the test results meet the expected design requirements, and the system runs stably.

关 键 词：ARDUINO LABVIEW 多路自动 土壤湿度传感器 舵机 

分 类 号：S24[农业科学—农业电气化与自动化] S68[农业科学—农业工程]