检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:陈羽[1,2] 高阳 王毅刚[1,2] 杨志刚[1,2,4] 李启良 CHEN Yu;GAO Yang;WANG Yi-gang;YANG Zhi-gang;LI Qi-liang(Shanghai Automotive Wind Tunnel Center,Tongji University,Shanghai 201804,China;Shanghai Key Lab of Vehicle Aerodynamics and Vehicle Thermal Management System,Tongji University,Shanghai 201804,China;High-Speed Train System Integration National Engineering Laboratory,Changchun 130062,Jilin,China;Beijing Aeronautical Science & Technology Research Institute,Beijing 102211,China)
机构地区:[1]同济大学上海地面交通工具风洞中心,上海201804 [2]同济大学上海市地面交通工具空气动力学与热环境模拟重点试验室,上海201804 [3]高速列车系统集成国家重点实验室,吉林长春130062 [4]北京民用飞机技术研究中心,北京102211
出 处:《声学技术》2018年第5期475-481,共7页Technical Acoustics
基 金:国家重点研发计划课题(2016YFB1200503-04);上海市重点实验室项目(18DZ2273300);上海市浦江人才计划项目(17PJ1409300)
摘 要:受电弓是高速列车顶部最主要的气动噪声源,合理的导流罩设计是降低受电弓气动噪声的重要方法。通过声学风洞试验的方法,研究缩比模型导流罩对高速列车受电弓气动噪声的影响,采用远场麦克风及声阵列,给出了风速范围为200~250 km·h^(-1)时的升弓、降弓状态下,受电弓和加装导流罩的远场气动噪声频谱、主要噪声源位置、强度和对应频带范围。研究表明,受电弓气动噪声为宽频带噪声,中频噪声源位于受电弓区域后部近车体位置,中高频、高频噪声源对应弓头和支座区域;升弓状态下,导流罩增大了弓头区域的气动噪声能量,在降弓状态下,导流罩减小了弓头和支座的噪声水平。The pantograph is the main aerodynamic noise source at the top of high-speed trains, and the key to reduce the pantograph aerodynamic noise is to properly design the pantograph guide cover. By using aero-acoustic wind tunnel test method, the influence of the guide cover on the aerodynamic noise of high speed train's pantograph is studied at the speed of 200-250 km.h-1. Received by far field microphones and the array, the noise spectrum, dominant noise source positions, the intensity and the frequency ranges are given under the pantograph lifted and folded conditions. The study indicates that the pantograph aerodynamic noise is broadband noise; the middle frequency noise sources locate at the rear of the pantograph area near train body; the pantograph head and supporter correspond to the positions of middle and high frequency noise sources. In pantograph lifted condition, the aerodynamic noise of the pantograph head is increased by the guide cover. However, in the pantograph folded condition, the aerodynamic noise at the pantograph head and supporter is decreased by the guide cover. The results show that: the proper design of the cover can reduce the aerodynamic noise in folded condition, and avoid increasing the aerodynamic noise at the pantograph head in lifted condition.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.3