Research on deposition rate of TiZrV/Pd film by DC magnetron sputtering method  

作　　者：Jie Wang Bo Zhang Yan-Hui Xu Yong Wang 

机构地区：[1]National Synchrotron Radiation Laboratory, University of Science and Technology of China, Hefei 230029, China

出　　处：《Nuclear Science and Techniques》2017年第4期44-50,共7页核技术（英文）

基　　金：supported by the National Natural Science Funds of China(No.11205155);Fundamental Research Funds for the Central Universities(WK2310000041)

摘　　要：An accelerator storage ring needs clean ultrahigh vacuum.A TiZrV non-evaporable getter(NEG) film deposited on interior walls of the chamber can realize distributed pumping,effective vacuum improvement and reduced longitudinal pressure gradient.But accumulation of pollutants such as N_2 and O_2 will decrease the adsorption ability of the NEG,leading to a reduction of NEG lifetime.Therefore,an NEG thin film coated with a layer of Pd,which has high diffusion rate and absorption ability for H_2,can extend the service life of NEG and improve the pumping rate of H_2 as well.In this paper,with argon as discharge gas,a magnetron sputtering method is adopted to prepare TiZrV-Pd films in a long straight pipe.By SEM measurement,deposition rates of TiZrV-Pd films are analyzed under different deposition parameters,such as magnetic field strength,gas flow rate,discharge current,discharge voltage and working pressure.By comparing the experimental results with the simulation results based on Sigmund's theory,the Pd deposition rate C can be estimated by the sputtered depth.An accelerator storage ring needs clean ultra-high vacuum. A TiZrV non-evaporable getter (NEG) film deposited on interior walls of the chamber can realize distributed pumping, effective vacuum improvement and reduced longitudinal pressure gradient. But accumulation of pollutants such as N₂ and O₂ will decrease the adsorption ability of the NEG, leading to a reduction of NEG lifetime. Therefore, an NEG thin film coated with a layer of Pd, which has high diffusion rate and absorption ability for H₂, can extend the service life of NEG and improve the pumping rate of H₂ as well. In this paper, with argon as discharge gas, a magnetron sputtering method is adopted to prepare TiZrV-Pd films in a long straight pipe. By SEM measurement, deposition rates of TiZrV-Pd films are analyzed under different deposition parameters, such as magnetic field strength, gas flow rate, discharge current, discharge voltage and working pressure. By comparing the experimental results with the simulation results based on Sigmund’s theory, the Pd deposition rate C can be estimated by the sputtered depth.

关 键 词：TiZrV-Pd DEPOSITION rates MAGNETRON SPUTTERING METHOD Non-evaporable GETTER 

分 类 号：TL594[核科学技术—核技术及应用]