干贝水分检测的建模及分级方法  

Research on Sample Division and Modeling Method of Spectrum Detection of Moisture Content in Dehydrated Scallops

作　　者：黄慧[1,2] 张德钧 詹舒越[1] 沈晔[1] 王杭州[1] 宋宏[1] 徐敬[1] 何勇[3] HUANG Hui;ZHANG De-jun;ZHAN Shu-yue;SHEN Ye;WANG Hang-zhou;SONG Hong;XU Jing;HE Yong(Ocean College,Zhejiang University,Zhoushan 316021,China;Key Laboratory of Fishery Equipment and Engineering,Ministry of Agriculture,Shanghai 200092,China;College of Biosystems Engineering and Food Science,Zhejiang University,Hangzhou 310058,China)

机构地区：[1]浙江大学海洋学院,浙江舟山316021 [2]农业部渔业装备与工程技术重点实验室,上海200092 [3]浙江大学生物系统工程与食品科学学院,浙江杭州310058

出　　处：《光谱学与光谱分析》2019年第1期185-192,共8页Spectroscopy and Spectral Analysis

基　　金：农业部渔业装备与工程技术重点实验室开放基金项目(N20150117);浙江省教育厅项目(N20140264);中央高校基本科研业务费专项(172210161);国家自然科学基金项目(41606214)资助

摘　　要：高光谱成像已被应用于建立干贝水分含量预测模型,其模型性能受样本划分方法及建模方法影响。样本划分方法决定着所选样本是否具有代表性,而建模方法决定着如何利用样本建立模型,但样本划分方法与建模方法的内在联系却鲜有研究报道。在方法优选上,将样本划分方法与建模方法进行组合,探究不同方法组合对干贝水分含量预测模型性能的影响,对干贝水分检测建模及分级方法的优选具有重要意义,同时也能为其他样本的光谱建模提供参考。采集380～1 030nm波段下270个干贝样本的高光谱图像,提取干贝样本的光谱数据,通过RS,KS,SPXY和CG四种常用的方法划分样本,并以PLSR和LS-SVM两种常用的建模方法建立多个干贝水分含量预测模型,计算和比较各模型的性能指标。结果表明:PLSR模型使用RS法划分干贝水分含量样本最为适宜(其RPD为4.079 6),LS-SVM模型使用SPXY划分法最为适宜(其RPD为4.175 6),划分样本方法的优劣与建模方法有关,其优选需要结合特定的建模方法进行。在常用的四种样本划分方法和两种建模方法中,采用SPXY法划分干贝水分含量样本并结合LS-SVM法建模的效果和精度最好。Hyperspectral imaging technology has been used to establish the prediction model of moisture content in dehydrated scallops,and the model performance is affected by sample division method and modeling method.The method of sample division determines whether the selected sample is representative,and the modeling method determines how to use the sample to build the model,but the internal relationship between the sample division method and the modeling method has been rarely reported.It is important to explore the effects of different sample division methods and modeling methods on the prediction of the moisture content of scallops,and it can also provide reference for the study of spectral modeling of other samples.In this paper,the hyperspectral data of 270 scallops were extracted from spectral images captured by a hyperspectral imaging system in the 380~1 030 nm range.The samples were divided by RS,KS,SPXY and CG.The prediction models were established by PLSR and LS-SVM.The performance indexes of each model were calculated and compared.The results showed that the best sample division method is RS when using PLSR building prediction model(the RPD is 4.079 6)and SPXY is most suitable for LS-SVM model(the RPD is 4.175 6).The advantages and disadvantages of the division of the sample set are related to the modeling method,and the best choice should take modeling method into account.In this commonly used four sample division methods and two modeling methods,SPXY method is used to classify the sample set of moisture content and combine with LS-SVM method to optimize the effect and precision.

关 键 词：高光谱数据 干贝 样本划分 建模方法 

分 类 号：O433.4[机械工程—光学工程]