COB LED光源封装密度对发光效率的影响  被引量:4

Effect on Luminous Efficiency of COB LED Light Source Package Density

在线阅读下载全文

作  者:李炳乾 罗明浩 俞理云 夏正浩 陈叶青[1] 陈岩 LI Bingqian;LUO Minghao;YU Liyun;XIA Zhenghao;CHEN Yeqing;CHEN Yan(Wuyi University,College of Applied Physics and materials,Jiangmen 529020,China;Zhongshan Guangsheng Semiconductor Technology Co.,Ltd.,Zhongshan 528421,China)

机构地区:[1]五邑大学应用物理与材料学院,广东江门529020 [2]中山市光圣半导体科技有限责任公司,广东中山528421

出  处:《照明工程学报》2019年第1期47-50,55,共5页China Illuminating Engineering Journal

基  金:国家自然科学基金-青年基金项目(批准号:51602227);广东省教育厅重点平台建设跃升计划工程中心项目(批准号:GCZX-A1411);五邑大学教授启动经费(批准号:2015JS05)

摘  要:采用镜面率基板,制作了18 W、24 W和36 W等不同封装密度的COB LED光源,研究了脉冲驱动时不同封装密度COB LED光源发光效率的电流依赖关系和恒流驱动时的发光效率维持率。通过采用沉粉技术,提高了高密度封装COB光源的发光效率和恒流发光效率维持率。研究结果表明:随着封装密度的增加,光源的发光效率呈现下降趋势,恒流(300 m A)驱动时,24 W、36 W光源发光效率分别下降了1. 31%和10. 87%。相比于传统荧光粉涂覆工艺,恒流驱动时,发光效率初始值提高了1. 00%,表现出更好的光效维持率;在持续点亮30 min时,发光效率维持率达到97. 60%,高于传统荧光粉涂覆工艺2. 16%。Using the mirror aluminum substrate, the COB LED light sources are produced with different package densities such as 18 W, 24 W and 36 W. The current dependence under pulse drive of the luminous efficiency of the COB LED light source with different package densities and the maintenance rate of the luminous efficiency with the constant current drive are studied. The luminous efficiency and constant current luminous efficiency maintenance rate of the high density package COB light source is improved by using the technology of deposited phosphor process. The results show that the luminous efficiency of the 24 W and 36 W light sources is decreased by 1.31% and 10.87%, when is driven by constant current (300 mA). Compared with the traditional phosphor coating process, when driven by the constant current, the initial value of the luminous efficiency is increased by 1.00%. At the same time, the light efficiency maintenance rate is better, the luminous efficiency of the light emitting efficiency is 97.60% with 30 minutes continuous lighting, higher than the traditional phosphor coating process by 2.16%.

关 键 词:COB封装 LED光源 封装密度 沉粉工艺 

分 类 号:TN383.1[电子电信—物理电子学]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象