基于MRAS的无轴承同步磁阻电机无位移传感器控制  

Displacement Sensorless Control of Bearingless Synchronous Reluctance Motor Based on MRAS

作　　者：张汉年[1] 段向军[1] 张涛 鲍安平[1] ZHANG Hannian;DUAN Xiangjun;ZHANG Tao;BAO Anping(Faculty of CQC New Energy Technology,Nanjing College of Information Technology,Nanjing 210023,China;Faculty of Automation,Huaiyin Institute of Technology,Huaian 223003,China)

机构地区：[1]南京信息职业技术学院中认新能源技术学院,南京210023 [2]淮阴工学院自动化学院,江苏淮安223003

出　　处：《微电机》2019年第5期66-70,共5页Micromotors

基　　金：江苏省“333人才培养工程”项目(2016-07);江苏省高校自然科学研究面上项目(16KJB470019);江苏省“六大人才高峰”资助项目(2016-GDZB-009);江苏省高校“青蓝工程”资助项目(2019)

摘　　要：无轴承同步磁阻电机的悬浮运行需要实时检测转子径向位移,通常在电机内部安装机械位移传感器,该方法存在安装调试复杂、电机体积增大、系统可靠性降低、成本增加等问题。针对上述问题,将模型参考自适应转子位移估计方法应用到电机无位移传感器控制中。基于无轴承同步磁阻电机转矩绕组和悬浮绕组电流状态方程,建立了电机电流参考模型和可调模型,选取合适的自适应律对两个模型的输出误差进行调节,辨识出电机转子径向位移。研究结果表明,模型参考自适应法能有效跟踪电机转子位移变化,估算精度较高,系统动、静态性能良好。Bearingless synchronous reluctance motor (BSyRM) suspension operation requires real-time detection of rotor radial displacement,the mechanical displacement sensors are usually installed in the motor. This method has problems,such as complex installation,increased volume,reduced system reliability and increased cost. To solve the problems,the model reference adaptive system(MRAS) method was applied to the sensorless control of BSyRM. Based on the current state equations of torque windings and suspension windings,the reference model and adjustable model of the currents were established. The output error of the models was adjusted based on the adaptive law,so the motor displacements were estimated. The results show that the MRAS method can effectively track the displacement variation with high accuracy,the system has good dynamic and static performance.

关 键 词：无轴承同步磁阻电机 模型参考自适应 无位移传感器控制 

分 类 号：TM352[电气工程—电机]